PACKAGING and SUPPLY AGREEMENT for the packaging of pharmaceuticals between

Exhibit 10.25

***Text Omitted and Filed Separately

with the Securities and Exchange Commission.

Confidential Treatment Requested

Under 17 C.F.R. Sections 200.80(b)(4)

and 230.406.

Execution Version

PACKAGING and SUPPLY AGREEMENT

for the packaging of pharmaceuticals between

NITEC PHARMA AG, Kaegenstrasse 17, CH-4153 Reinach, Switzerland, hereinafter referred to as “NITEC” and

CATALENT GERMANY SCHORNDORF GmbH Steinbeisstraße 2, D-73614 Schorndorf, Germany, hereinafter referred to as “CATALENT” and made effective 29 Sept. 2008, (the “Effective Date”).

WHEREAS, NITEC is a company manufacturing, distributing and licensing pharmaceutical products, including LODOTRA™ prednisone (Presentations in accordance with Appendix 1), and is interested in having CATALENT package LODOTRA for use, marketing, distribution and sale by NITEC or a third party.

WHEREAS, CATALENT has extensive experience in and maintains adequate facilities and personnel for contracting services related to the packaging of pharmaceuticals (“Services”) in accordance with Appendix 7.

WHEREAS, the Parties wish to enter into a close relationship in respect of CATALENT’s assembly of NITEC’s LODOTRA (as more specifically described in Appendix 1) and its supply to NITEC to the effect that both Parties will obtain maximum economic benefits from their cooperation.

WHEREAS, NITEC and CATALENT shall enter into a separate quality agreement (the “Quality Agreement”) governing the quality issues of CATALENT’s Services for NITEC.

WHEREAS, the Parties wish to have all commercial issues of CATALENT’s Services for NITEC governed by this Agreement.

Now, therefore, the Parties agree as follows:

ARTICLE 1 - SUBJECT OF THE AGREEMENT

1. The subject matter of this Agreement is the packaging of LODOTRA as set forth in Appendix 2 (hereinafter referred to as “Packaging Requirements”) at prices and conditions set forth in Appendix 3 (hereinafter referred to as “Prices”), and the delivery of such finished products (hereinafter referred to as “Finished Product”) to NITEC or such other destinations as NITEC may request, and Catalent may agree in writing, as provided for in the Quality Agreement.

2. CATALENT acknowledges that partners or affiliated companies of NITEC might be interested in the future to become a Party of this Agreement. CATALENT therefore agrees that - subject to the execution of a respective amendment to this Agreement - partners or affiliated companies of NITEC shall upon agreement of the Parties become a Party to this Agreement.

3. CATALENT acknowledges that assembly of LODOTRA on CATALENT’s site at Schorndorf is of utmost importance for the performance of this Agreement. CATALENT

Execution Version

therefore accepts that it may not render its Services from a different site without NITEC’s prior written consent.

ARTICLE 2 - DELIVERY OF NITEC PRODUCT LODOTRA

1. NITEC shall deliver to CATALENT, at NITEC’s own expense and risk of loss, tablets of LODOTRA DDP (Incoterms 2000), CATALENT’s facility in Schorndorf as specified in Appendix 1 and the Quality Agreement in order to enable CATALENT to render the Services.

2. The Parties accept the likelihood of minor losses of tablets of products when comparing the amount of tablets shipped by NITEC to CATALENT and the amount of tablets as Finished Product delivered from CATALENT to NITEC or its partners. Therefore, the Parties expressly agree that, upon the first anniversary of the date of this Agreement, they shall mutually agree on a reasonable loss rate. NITEC further acknowledges that any broken or non-conforming tablets of LODOTRA shall not be included in the calculation of such loss rate. CA TALENT shall reimburse NITEC for losses only in the event its losses exceed the reasonable loss mutually agreed between the Parties.

ARTICLE 3 - FORECAST AND DELIVERY

1. The average quantities for each of NITEC’s individual orders for Finished Product are specified in Appendix 4.

2. During the term of this Agreement, NITEC shall make available to CATALENT an […***…] rolling forecast of its requirements of Finished Product which shall be updated by NITEC every […***…]. Only the […***…] of such rolling forecast shall be binding for NITEC and result in separate firm purchase orders. The volumes specified for the other […***…] of such rolling forecast shall be non-binding estimates only.

3. NITEC shall send orders to CATALENT for Finished Product and, subject to CATALENT’s written confirmation, CATALENT shall deliver the Finished Product ordered Ex Works (Incoterms 2000), CATALENT’s facility within a period of […***…] after receipt of confirmation of NITEC’s purchase order. Subject to CATALENT’s written confirmation as set forth above, CATALENT shall use its commercially reasonable efforts to fulfil purchase orders for Finished Product. In the case of orders exceeding the volumes specified in NITEC’s forecasts for its binding period of […***…] by up to […***…] CATALENT will use commercially reasonable efforts to fulfill this exceeding request within the […***…] in which the original order was placed. CATALENT shall use commercially reasonable efforts to fulfill purchase orders for Finished Product exceeding the volumes specified in NITEC’s forecast by more than […***…]. NITEC undertakes to notify CATALENT in writing of its exceeding requirements for Products as early as reasonably possible.

4. CATALENT shall be responsible for the order and the purchase of raw materials and packaging materials, except primary packaging material (collectively “Materials”), from third parties as it deems appropriate. NITEC shall be responsible for firmly ordering primary packaging material (“Primary Packaging Materials”) from […***…] or any other supplier chosen by NITEC in accordance with NITEC’s rolling forecast and the contract

Execution Version

between NITEC and […***…] a copy of which is attached as Appendix 6 and shall arrange for the delivery of such Primary Packaging Materials DDP (Incoterms 2000), CATALENT’s facility; provided, however, as set forth in Article 13.3, NITEC shall not hold CATALENT responsible or make a claim against CATALENT if a delay is attributable to […***…] or the respective supplier’s failure to deliver the Primary Packaging Materials properly or in a timely manner. In no event, however, shall NITEC be obliged to purchase from CATALENT Materials or otherwise pay for Materials, which exceed the amount necessary to comply with NITEC’s requirements of Finished Products set out in the binding part of the rolling forecast (which is the first three months).

5. In the event that CATALENT becomes aware of circumstances (including Force Majeure circumstances) that may cause a delay in the delivery of Finished Product, CATALENT shall notify NITEC immediately. CATALENT shall use commercially reasonable efforts to avoid any delay in delivery and, if such delay cannot be avoided, shall minimize and afford to NITEC its full co-operation to minimize the effects of delay for NITEC. Further, the Parties, shall as soon as feasible after the execution hereof, mutually prepare a crisis management plan setting out its strategies and solutions in the event of CATALENT’s inability to fullfil its contractual obligations.

6. It is expressly understood that CATALENT’s obligations pursuant to Article 3.5 is conditional upon NITEC’s delivery of tablets of LODOTRA, as set forth in Article 2 and the Quality Agreement, and NITEC’s (or a third party’s) delivery of Primary Packaging Material as set forth in Article 3.4 at least two (2) weeks prior to the confirmed date of starting the Services.

ARTICLE 4 - CONTINUOUS IMPROVEMENT PROGRAMME

1. The Parties shall hold Continuous Improvement Programme (“CIP”) meetings at appropriate intervals to identify and implement ways and means by which they can continually improve quality, time and cost of the Finished Product and Services supplied hereunder.

2. A set of reasonable continuous improvement objectives (e.g. optimisation of yield losses) shall be mutually agreed for each calendar year starting after one year of first commercial production. At the end of such year, CATALENT and NITEC shall review the CIP and measure the achievement of the CIP objectives by CATALENT.

ARTICLE 5 - PRICES AND CONDITIONS

1. The prices and conditions set forth in Appendices 2 and 3 shall apply to the Services during the first year of this Agreement. Thereafter, the Parties shall review the price structure and mutually agree on any fair and reasonable adjustments to the prices taking into particular consideration, the principles set forth in Articles 5.2 and 5.3, below.

2. NITEC or CATALENT may request that the prices for the Services be adjusted in accordance with the calculation set out in Appendix 3 if: (i) […***…]; or (ii) […***…]; or (iii) if NITEC requests a change in the Services to which CATALENT agrees.

Execution Version

3. NITEC shall pay CATALENT’s invoices within […***…] of the date of invoice, net. Late payments shall be subject to a surcharge of […***…] on all overdue accounts. All payments shall be made in Euros.

ARTICLE 6 - REPRESENTATIONS AND WARRANTIES

1. Each Party hereby represents and warrants to the other Party that such Party (i) is duly organized and validly existing under the laws of the jurisdiction in which it is organized, (ii) has the power and authority and the legal right to own and operate its property and assets, and to carry on its business as it is now being conducted, and (iii) is in compliance with all requirements of any applicable laws, except to the extent that any non-compliance would not adversely affect such Party’s ability to perform its obligations under this Agreement.

2. Each Party hereby represents and warrants to the other Party that such Party (i) has the power and authority and the legal right to enter into this Agreement and to perform its obligations hereunder, (ii) has taken all necessary action on its part to authorize the execution and delivery of this Agreement and the performance of its obligations hereunder, and (iii) this Agreement has been duly executed and delivered on behalf of such Party, and constitutes a legal, valid, binding obligation, enforceable against such Party in accordance with its terms.

3. NITEC represents and warrants that (i) all material (content of packaging insert, promotional material and the LODOTRA) delivered to CATALENT shall comply with all applicable laws governing their manufacture, use, promotion, sale and distribution; (ii) NITEC has obtained all permits, licenses or authorizations from all relevant regulatory agencies necessary or required for the manufacture and possession of LODOTRA and for its use as set forth in the respective order; (iii) NITEC will not use LODOTRA nor any other material supplied by NITEC for any clinical study, sale, marketing or any commercial activity without ensuring that it has obtained all permits, licenses or authorizations from all relevant regulatory agencies; (iv) NITEC acknowledges that it will review all packaging inserts as well as labels, drawings and artwork and that all such material is subject to NITEC’s approval; and (v) NITEC has provided to CATALENT all available safe handling instructions, health and environment information and material safety data sheets applicable to LODOTRA and any other materials supplied by NITEC.

4. CATALENT represents and warrants that all Services rendered and all Finished Product delivered to NITEC hereunder will be in full conformance with cGMP rules, applicable local requirements and all Specifications agreed and the Quality Agreement; provided, however, CATALENT shall not be held liable and NITEC shall not make a claim for any non-conformity attributable to NITEC-supplied materials (including, but not limited to, the LODOTRA, artwork, packaging inserts and labeling).

5. NITEC or its partners shall inspect each shipment of Finished Product for obvious defects and completeness within […***…] after receipt of each delivery and NITEC shall notify CATALENT in writing immediately of any defects or shortages it has discovered. § 377 HGB (German Commercial Code) shall not apply.

6. In the event of hidden defects not readily ascertainable upon inspection per Article 5.5 above, the Party that first becomes aware of the defect shall notify the other Party of any such defect immediately, but in no event later than within […***…], after they have been

Execution Version

discovered which for the purposes of the Agreement shall not be more than […***…] after completion of the Services.

7. If Finished Product delivered hereunder does not fully comply with the warranties given by CATALENT in Article 6.4 (“Defective Products”), NITEC may, subject to Article 9, submit within a period of […***…] either a demand for replacement of the Defective Products at no additional charge for the Services (if and to the extent the defect is directly attribute to CATALENT’s gross negligence (Grobe Fahrlässigkeit) or willful misconduct) for Finished Product of proper quality or rectification of the Defective Products or a credit corresponding to the invoiced amount for the Defective Products. In the event CATALENT is required to replace Defective Product, CATALENT shall replace Defective Product with conforming Product, provided that in such event, NITEC shall supply, at its cost and expense, the LODOTRA and any other materials supplied by NITEC necessary to replace the Defective Product. Conversely, any cost and expenses related to the Defective Product incurred by CATALENT and/or NITEC, including but not limited to the costs and expenses for full replacement (also in the case of hidden defects) and/or destruction of Defective Product shall be borne by CATALENT (whereby the cost of LODOTRA shall be set out in Appendix 8) only if and to the extent the defect is directly attributable to CATALENT’s gross negligence or willful misconduct.

8. If there is a dispute whether a Finished Product delivered is a Defective Product or whether a Finished Product’s defect has been caused by CATALENT or by NITEC after receipt, a sample of the rejected Finished Product and a sample retained by CATALENT shall be exchanged between the Parties for analysis. If the Parties fail to come to a mutually satisfying conclusion within a period of […***…] following the exchange of the samples, both samples shall be submitted to a laboratory acceptable to both Parties as agreed case by case (the “Laboratory”). The Laboratory shall determine whether the rejected Finished Product is defective and thereafter, to which Party such defect is to be attributed, and its determination, in the absence of manifest error, shall be final and binding upon the Parties. The costs charged by the Laboratory shall be borne by the Party that has been found to be wrong by the Laboratory’s determination.

9. THE OBLIGATIONS OF CATALENT TO REPLACE OR RECTIFY DEFECTIVE PRODUCT IN ACCORDANCE WITH ARTICLE 6.7 SHALL BE NITEC’S SOLE AND EXCLUSIVE REMEDY FOR DEFECTIVE PRODUCT AND IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED.

ARTICLE 7 - RECALL OR WITHDRAWAL OF FINISHED PRODUCT

1. In the event that either Party is of the opinion that a recall or product withdrawal of the Finished Product should be considered, such Party shall immediately inform the other Party and the Marketing Authorisation Holder (MAH) for the Finished Product in writing (including telefax) of such conclusion. The further procedure and in particular all communication shall be coordinated by NITEC’s European Qualified Person (QP)/Pharmacovigilance in coordination with the QP of the Manufacturer and the concerned national QPs for Pharmacovigilance of the other involved Parties. A final decision on a recall or product withdrawal will be made by NITEC’s committee for crisis management and executed by the relevant MAH.

Execution Version

2. CATALENT shall not take any action, other than action which it is required to take by law, without first obtaining the approval of NITEC’s QP.

3. In conjunction with such recall, each Party shall assist each other in the investigation to determine the cause and extent of the problem and the Parties shall fully cooperate with each other concerning the necessity and nature of such action. Depending on the nature of such an event the Parties agree to find a consensus in due time.

4. In the event that any Finished Product is recalled because it does not conform to the warranties set forth in Article 6 and NITEC or a third party is responsible for such non-conformity, or because NITEC was negligent or intentionally acted wrongfully, or due to an omission of NITEC, NITEC shall bear the costs and expenses incurred directly from such recall, including without limitation, expenses related to communications and meetings with all required regulatory agencies, expenses of replacement stock, the cost of notifying customers and costs associated with shipment of recalled Finished Product from customers and shipment of an equal amount of replacement Finished Product to those same customers. Conversely, in the event that any Finished Product is recalled because it does not conform to the warranties set forth in Article 6 and CATALENT is responsible for such non-conformity, or because CATALENT was negligent or intentionally acted wrongfully, or due to an omission of CATALENT, CATALENT shall, subject to Article 9, bear the direct administrative costs and expenses incurred directly from such recall, as approved by CATALENT in writing in advance.

5. In the event that CATALENT becomes knowledgeable of any pharmaceutical technical complaint or an adverse reaction related to the product, the NITEC QP Pharmacovigilance should be immediately informed.

ARTICLE 8 - INDEMNIFICATION

1. Subject to Article 9, each Party shall be liable to the other Party for all damages arising for the other Party out of the breach of any obligation of the breaching Party under this Agreement.

2. Subject to Article 9, each Party (the “Indemnifying Party”) shall indemnify and hold the other Party (the “Indemnified Party”) harmless for third party claims and all related costs, expenses, liabilities, damages, losses and fees, (including reasonable legal and other reasonable professional fees and costs) (“Liability”) arising out of or resulting from the Indemnifying Party’s breach of this Agreement or any negligent, willful misconduct or other wrongful act or omission directly attributable to the Indemnifying Party in connection with this Agreement.

3. In addition to Article 8.2, NITEC shall indemnify and hold harmless CATALENT, its affiliates, and their respective directors, officers, employees, and agents from and against any and all losses arising out of or resulting from (A) any breach of its representations, warranties or obligations set forth in this Agreement; (B) any manufacture (other than the negligently performed Services), sale, promotion, distribution, use of or exposure to the LODOTRA or any materials supplied by NITEC, including, without limitation, product liability or strict liability; (C) NITEC’s exercise of control over the Services to the extent that NITEC’s instructions or directions violate applicable laws; (D) any actual or alleged infringement or violation of any patent, trade secret, copyright, trademark or other proprietary rights provided

Execution Version

by NITEC; or (E) any negligence or willful misconduct of NITEC, except to the extent that any of the foregoing arises out of or results from CATALENT’s negligence, willful misconduct, or breach of this Agreement.

4. Upon receiving notice of any claim for Liability under this provision, such Party shall promptly notify the Indemnifying Party in writing with full details of the claim; provided, however, that failure to give notice shall not limit or otherwise reduce the indemnification provided for in this Agreement except to the extent the delay or failure to give notice materially impairs the defence of such claim for Liability. Regardless, unless made with the express prior written consent of the Indemnifying Party, no sums paid by the Indemnified Party in settlement of any lawsuit shall be recoverable under this provision. Conversely, under no circumstances shall the Indemnifying Party settle any claim or admit wrongdoing or liability of the Indemnified Party without the Indemnified Party’s express prior written consent.

ARTICLE 9 - LIMITATION OF LIABILITY

1. IN NO EVENT SHALL THE LIABILITY OF CATALENT UNDER THIS AGREEMENT […***…].

2. NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, LOST DATA, LOST REVENUES AND/OR LOSS OF BUSINESS OPPORTUNITY.

3. To the extent that any provision in this Agreement or any order purporting to limit either Party’s liability to the other Party or either Party’s remedies (any such provision a “Limiting Provision”) violates or contradicts any law deemed by the final, non-appealable order of a court or other body of competent jurisdiction to govern any dispute (any such law a “Mandatory Applicable Law”) such Limiting Provision shall not apply, but shall instead be replaced by (and only to the extent of) the applicable provisions of such Mandatory Applicable Law solely for the purposes of resolving such dispute. In particular, nothing in this Agreement or any order shall limit a Party’s liability for death or personal injury arising from its own negligence or for strict liability for defective products if such limitation would violate a Mandatory Applicable Law.

ARTICLE 10 - INSURANCE

1. CATALENT shall, at its own cost and expense, obtain and maintain in full force and effect the following insurance during the term of this Agreement, each covering claims brought and suits served anywhere in the world:

Execution Version

In the event that any of the required policies of insurance are written on a claims made basis, then such policies shall be maintained during the entire teen of this Agreement and for a period of not fewer than […***…] following the termination or expiration of this Agreement. Each insurance policy that is required under this Article 10.1 shall be obtained from an insurance carrier with an A.M. Best rating of at least A- VII.

CATALENT shall furnish evidence of insurance for the required policies to NITEC as soon as practicable after entering into this Agreement and upon renewal of any such policies or upon the respective policy renewal becoming effective.

2. NITEC shall, at its own cost and expense, obtain and maintain in full force and effect the following insurance during the term of this Agreement, each covering claims brought and suits served anywhere in the world:

In the event that any of the required policies of insurance are written on a claims made basis, then such policies shall be maintained during the entire term of this Agreement and for a period of not fewer than […***…] following the termination or expiration of this

Execution Version

Agreement. Each insurance policy that is required under this Article 10.2 shall be obtained from an insurance carrier with an A.M. Best rating of at least A- VII.

NITEC shall furnish a certificate of insurance for the required policies to CATALENT as soon as practicable after entering into this Agreement and upon each renewal of any such policies becoming effective.

ARTICLE 11 - CONFIDENTIALITY

1. The recipient of any information provided by the other Party as a result of the operation of or in connection with this Agreement or its preparation, negotiation or termination shall treat such information in confidence and shall not use or disclose such information to any third party except for the purposes of this Agreement. The same applies to the contents of this Agreement.

2. The aforesaid does not apply to any information which (a) is or later comes into the public domain otherwise than by breach of this Agreement, or (b) is in the possession of the Party receiving the information prior to its receipt under this Agreement, or (c) is independently received from a third party, which is free to disclose the information.

3. The obligations set forth in this Article 11 do not prevent the disclosure of information to the competent authorities or agencies, in particular judicial or administrative agencies, if required by law, but such disclosure shall be strictly limited to the extent of the disclosure required by the relevant authority or agency. In such event, the Party making the disclosure is required to give prior written notice to the other Party and authorize it to seek an appropriate preventive solution.

4. All confidential information shall remain the sole property of the Party disclosing such information or data. Upon termination of this Agreement, the receiving Party shall, promptly return within thirty (30) days all such information, including any copies thereof, and cease its use or, at the request of the disclosing Party, shall promptly destroy the same and certify such destruction to the disclosing Party.

ARTICLE 12 - TERM OF AGREEMENT

1. The Agreement shall come into force upon its Effective Date and shall remain in effect for a period of three (3) years after the launch of LODOTRA in the EU or in the United States, whichever comes first (the “Initial Period”). After the expiry of the Initial Period the Agreement shall be extended automatically for further […***…] renewal periods (if any, the “Renewal Periods”)(the Initial Period and any Renewal Periods will be the “Term”) unless either Party gives at least […***…] written notice to terminate the Agreement before expiry of the then current period. Such termination shall not apply to any then-outstanding orders.

2. The right to terminate the Agreement for cause is reserved. In particular, terminations for cause are constituted by a gross failure to fulfil contractual obligations by either Party. Without limitation to the generality of the foregoing, a gross failure on the part of CATALENT shall be deemed to have occurred if CATALENT delivers Finished Product that does not conform to the cGMP (or that would hinder the commercialisation of the Finished

Execution Version

Product) more than […***…] consecutive orders during a […***…] period, or more than […***…].

3. NITEC may terminate this Agreement if […***…] whereby such termination shall be effective upon NITEC giving CATALENT at least […***…] written notice. In the event that NITEC terminates this Agreement pursuant to this Article 12(3), NITEC shall pay CATALENT all fees for Services rendered to the effective date of termination in accordance with the applicable order, including any non-cancelable obligations, works-in progress and materials ordered by CATALENT for the performance of Services under this Agreement as warranted by NITEC’s forecasts, plus all out-of-pocket expenses incurred by CATALENT on behalf of NITEC in connection with or as a result of such termination. CATALENT shall provide NITEC with an invoice for its termination expenses and charges under this Article 12.3 as soon as reasonably practicable following termination of this Agreement.

ARTICLE 13 - FINAL PROVISIONS

1. If changes in the market lead to a situation, which is not reasonable for either Party, both Parties will endeavour amicably to find a solution acceptable to both of them. The same applies if disputes arise from the performance of the Agreement.

2. Except as set forth in Article 6.8 all disputes, controversies, or differences which may arise between the Parties out of or in relation to or in connection with this Agreement shall be decided by the courts of Mannheim (if NITEC is the defendant) and Schorndorf (if CATALENT is the defendant).

3. Delay in or failure to carry out the obligations imposed on any Party under this Agreement shall not be deemed breaches of the Agreement if such delay or failure results from fire, explosion, labour dispute, natural disaster, war, legislative or governmental acts, or any other cause beyond the control of the affected Party, including for example, if […***…], or any other supplier, or the respective legal successor (see Article 3.4), fails to delivery the Primary Packaging Materials properly or in a timely manner, in each case through no fault or negligence of the Party invoking these circumstances as an excuse (collectively “Force Majeure”). Except with respect to […***…] or any other supplier nominated by NITEC, or the respective legal successor, A lack or failure of the affected Party’s sub-contractor shall not constitute Force Majeure unless caused by circumstances which represent Force Majeure themselves. In the event delay or failure due to Force Majeure continues for a period exceeding nine (9) months, either Party may terminate this Agreement effective immediately.

4. If individual provisions of this Agreement are invalid or become invalid, the Parties hereby agree that this shall not affect the validity of the remainder. The Parties undertake to replace the invalid provisions by others with the same economical effect as far as legally possible.

5. This Agreement including its Appendices 1 to 8 constitutes the entire agreement between the Parties concerning the subject matter.

Execution Version

6. Any alterations of or additions to this Agreement or its Appendices must be made in writing and agreed to by both Parties. This requirement shall also apply to the preceding sentence.

7. This Agreement is and any confirmed order placed under this Agreement is subject to German law without its provisions regarding the conflict of laws or the Vienna Convention on the International Sale of Goods (CISG).

8. The rights and obligations of the Parties shall continue under Articles 8 — 11, 12.3, 13.7 and 13.8 notwithstanding expiration or termination of this Agreement.

Execution Version

List of Appendices

Appendix 1 — LODOTRA Presentations

Appendix 2 — Packaging Requirements

Appendix 3 — Prices and Price Re-Calculation

Appendix 4 — Average quantities

Appendix 5 — Delivery sites

Appendix 6 — Copy of Agreement […***…] and NITEC

Appendix 7 — Services

Appendix 8 — Costs of LODOTRA

Execution Version

Appendix 1 — LODOTRA presentations

Lodotra 1 mg:

Each modified-release tablet contains 1 mg of prednisone

Lodotra 2 mg:

Each modified-release tablet contains 2 mg of prednisone

Lodotra 5 mg:

Each modified-release tablet contains 5 mg of prednisone

Execution Version

Appendix 2 — Packaging Requirements […***…]

[…***…]

[…***…]

[…***…]

[…***…]

[…***…]

[…***…]

[…***…]

Execution Version

Appendix 3 – Prices

[…***…]

Execution Version

[…***…]

[…***…]

Execution Version

Appendix 5 – Delivery Sites

(by NITEC)

[…***…]

[…***…]

[…***…]

[…***…]

[…***…]

[…***…]

[…***…]

[…***…]

Execution Version

Appendix 6 - Copy of Agreement between […***…] and NITEC

[Please see attached.]