TENTH AMENDMENT TO CREDIT AGREEMENT

Contract Categories: Business Finance - Credit Agreements
EX-10.1 2 ex101sifcotenthamendment.htm EX-10.1 TENTH AMENDMENT TO CREDIT AGREEMENT Document

Execution Copy

TENTH AMENDMENT TO CREDIT AGREEMENT

    THIS TENTH AMENDMENT TO CREDIT AGREEMENT, dated as of May 21, 2024 (this "Amendment"), is by and among SIFCO Industries, Inc., an Ohio corporation (“SIFCO”), and Quality Aluminum Forge, LLC, an Ohio limited liability company (“Quality Forge” and, together with SIFCO, collectively, the “Borrowers” and each, individually, a “Borrower”), any other Loan Parties party hereto, and JPMorgan Chase Bank, N.A., a national banking association (the “Lender”).

RECITALS

    A.    The Borrowers, any other Loan Parties party thereto, and the Lender are parties to a Credit Agreement dated as of August 8, 2018 (as amended and as it may be further amended or modified from time to time, the “Credit Agreement”).

    B.    The Borrowers and any other Loan Parties desire to amend the Credit Agreement, and the Lender is willing to do so in accordance with the terms hereof.

    TERMS

    In consideration of the premises and of the mutual agreements herein contained, the parties agree as follows:

ARTICLE 1. AMENDMENTS. Upon fulfillment of the conditions set forth in Article IV hereof, the Credit Agreement shall be amended effective as of the date hereof as follows:

    1.1    Section 2.01 of the Credit Agreement is hereby amended and restated in its entirety as follows:

SECTION 2.01. Commitment. Subject to the terms and conditions set forth herein, the Lender agrees to make Revolving Loans to the Borrowers from time to time during the Availability Period in an aggregate principal amount that will not result in the Revolving Exposure exceeding the least of (x) the Revolving Commitment, less the Availability Block, if applicable, (y) the Borrowing Base, and (z) in combination with the Export Revolving Loans under the Export Credit Agreement, (i) $18,000,000 through September 30, 2023, (ii) $19,000,000 from and including October 1, 2023 through May 14, 2024, and (iii) $22,000,000 thereafter until, and reducing to zero and terminating on, the Maturity Date, subject to the Lender’s authority, in its sole discretion, to make Protective Advances pursuant to the terms of Section 2.04.

    1.2    Section 2.10(b) of the Credit Agreement is hereby amended and restated in its entirety as follows:

    (b)    In the event and on such occasion that the Revolving Exposure exceeds the least of (x) the Revolving Commitment, less the Availability Block, if applicable, (y) the Borrowing Base, and (z) in combination with the Export Revolving Loans under the Export Credit Agreement, (i) $18,000,000 through September 30, 2023, (ii) $19,000,000 from and including October 1, 2023 through May 14, 2024, and (iii) $22,000,000 thereafter, the Borrowers shall prepay the Revolving Loans and LC Exposure or
1



cash collateralize LC Exposure in accordance with Section 2.05(h), as applicable in an aggregate amount equal to such excess.

1.3    The following new clause (c) is added to Section 5.17 of the Credit Agreement:

(c)    The Borrowers shall continue to use good faith, commercially reasonable efforts to refinance and pay in full the Secured Obligations as soon as practicable. The Borrowers will provide periodic updates and other information with respect thereto as reasonably requested by the Lender, will notify the Lender of any refinancing proposals of any kind and will direct any advisors to respond to any inquiries by Lender and to fully and candidly discuss with Lender any matters relating to such refinancing efforts.

1.4    The following definition in the Definitions Schedule to the Credit Agreement is hereby amended and restated in its entirety as follows:

    “Silk Guaranty” means that certain Guaranty Agreement, dated as of the Ninth Amendment Effective Date, made by Mark J. Silk (“Silk”) in favor of Lender and acknowledged by Borrowers, as amended or modified from time to time.

    1.5    The definition of “Borrowing Base” in the Borrowing Base Schedule to the Credit Agreement is hereby amended and restated in its entirety as follows:

Borrowing Base” means, at any time, the sum of (a) 85% of Eligible Accounts at such time, plus (b) the lesser of (i) 70% of Eligible Inventory, valued at the lower of cost or market value, determined on a first-in-first-out basis, at such time, and (ii) 85% of the NOLV Percentage identified in the most recent inventory appraisal ordered by the Lender multiplied by Eligible Inventory, valued at the lower of cost or market value, determined on a first-in-first-out basis, at such time, minus (c) Reserves of $1,500,000, or such other amount, if any, as may be determined in writing by the Lender in its Permitted Discretion (which may be by email from the Lender), plus (d) the PP&E Component. The Lender may, in its Permitted Discretion, reduce the advance rates set forth above or reduce one or more of the other elements used in computing the Borrowing Base.

    1.6    Section 1 of the Terms Schedule to the Credit Agreement is hereby amended and restated in its entirety as follows:

“1.    Revolving Commitment (Definitions Schedule): $19,000,000.”

    ARTICLE II. REPRESENTATIONS. Each Loan Party represents and warrants to the Lender that:

    2.1    This Amendment has been duly executed and delivered by such Loan Party and constitutes a legal, valid and binding obligation of such Loan Party, enforceable in accordance with its terms, subject to applicable bankruptcy, insolvency, reorganization, moratorium or other laws affecting creditors' rights generally and subject to general principles of equity, regardless of whether considered in a proceeding in equity or at law.

    2.2    After giving effect to this Amendment, the representations and warranties contained in Article III of the Credit Agreement and in the other Loan Documents are true in all material respects on and as of the date hereof with the same force and effect as if made on and as of the date hereof (it being
2



understood and agreed that any representation or warranty which by its terms is made as of a specified date shall be required to be true and correct in all material respects only as of such specified date, and that any representation or warranty which is subject to any materiality qualifier shall be required to be true and correct in all respects).

    2.3    After giving effect to this Amendment, no Default exists or has occurred and is continuing, and no Default will be caused after giving effect to this Amendment.

    2.4    All certifications, representations and other statements made in each Borrower’s Officer’s Certificate dated as of August 8, 2018 and delivered to Lender are true on and as of the date hereof with the same force and effect as if made on and as of the date hereof and all resolutions and other statements referenced therein are in full force and effect, have not been rescinded and authorize the execution, delivery and performance of this Amendment.

    ARTICLE III. CONDITIONS OF EFFECTIVENESS. This Amendment shall become effective as of the date hereof when each of the following conditions is satisfied:
    
    3.1    The Loan Parties and the Lender shall have signed this Amendment.

    3.2    The Lender shall have received a copy of the fully executed Fifth Amendment to Export Credit Agreement dated as of the date hereof.

    3.3    The Lender shall have received a copy of the fully executed First Amendment to the Silk Guaranty in a form acceptable to the Lender and dated as of the date hereof.

    3.4    The Lender shall have received such other documents as disclosed on the closing list provided to the Loan Parties prior to the date hereof.

ARTICLE IV. MISCELLANEOUS.

    4.1    References in the Credit Agreement or in any other Loan Document to the Credit Agreement shall be deemed to be references to the Credit Agreement as amended hereby, as amended previously and as further amended from time to time.

    4.2    Except as expressly amended hereby, each of the Loan Parties agrees that the Credit Agreement and the other Loan Documents are ratified and confirmed, as amended hereby, and shall remain in full force and effect in accordance with their terms and that they are not aware of any set off, counterclaim, defense or other claim or dispute with respect to any of the foregoing. Each of the Loan Parties further (i) acknowledges and agrees that the Collateral Documents continue to be in full force and effect and are not impaired or adversely affected in any manner whatsoever, (ii) confirms its grant of security interests pursuant to the Collateral Documents to which it is a party in all Collateral and securing all Secured Obligations, and (iii) acknowledges that all Liens granted (or purported to be granted) pursuant to the Collateral Documents remain and continue in full force and effect in respect of, and to secure, the Secured Obligations. The execution, delivery and effectiveness of this Amendment shall not operate as a waiver of any right, power or remedy of the Lender under any of the Loan Documents, nor constitute a waiver of any provision of any of the Loan Documents. Nothing herein shall be deemed to entitle any Loan Party to any future consent to, or waiver, amendment, modification or other change of, any of the terms, conditions, obligations, covenants or agreements contained in the Credit Agreement or any other Loan Document in similar or different circumstances.

    4.3    Each Loan Party represents and warrants that it is not aware of any claims or causes of action against the Lender or any of its affiliates, successors or assigns, and that it has no defenses, offsets
3



or counterclaims with respect to the Secured Obligations. Notwithstanding this representation and as further consideration for the agreements and understandings herein, each Loan Party, on behalf of itself and its employees, agents, executors, heirs, successors and assigns (the “Releasing Parties”), hereby releases the Lender and its predecessors, officers, directors, employees, agents, attorneys, affiliates, subsidiaries, successors and assigns (the “Released Parties”), from any liability, claim, right or cause of action which now exists or hereafter arises as a result of acts, omissions or events occurring on or prior to the date hereof, whether known or unknown, including but not limited to claims arising from or in any way related to this Agreement, the other Loan Documents, all transactions relating to this Agreement or any of the other Loan Documents or the business relationship among, or any other transactions or dealings among, the Releasing Parties or any of them and the Released Parties or any of them.

    4.4    Capitalized terms used but not defined herein shall have the respective meanings ascribed thereto in the Credit Agreement. This Amendment is a Loan Document. This Amendment may be signed upon any number of counterparts with the same effect as if the signatures thereto and hereto were upon the same instrument. Among other provisions of the Credit Agreement, this Amendment is subject to Sections 8.06, 8.09 and 8.10 of the Credit Agreement.


[Signature Pages Follow]
4




    IN WITNESS WHEREOF, the parties signing this Amendment have caused this Amendment to be duly executed and delivered as of the day and year first above written.

BORROWERS:

                        SIFCO INDUSTRIES, INC.


By:__/s/____________________________________
Name: Tom Kubera
Title: Chief Financial Officer

                        
                        QUALITY ALUMINUM FORGE, LLC


By:__/s/____________________________________
Name: Tom Kubera
Title: Treasurer


SIFCO Tenth Amendment Signature Page


                        LENDER:

JPMORGAN CHASE BANK, N.A.


By:________________________________________
Name: Karson Malecky
Title: Authorized Officer
4874-9440-2491 v8 [7-7751]
SIFCO Tenth Amendment Signature Page