CONFIDENTIALTREATMENT REQUESTED CONFIDENTIAL PORTIONS OF THIS DOCUMENT HAVE BEEN REDACTED AND HAVE BEEN SEPARATELY FILED WITH THE SECURITIES AND EXCHANGE COMMISSION MEMORANDUM OF UNDERSTANDING

The Parties will work in good faith to finalize and execute an MSA by the target date listed above.

Flextronics shall perform the Services for Nutanix starting as of the execution of this MOU. The performance of the Services shall be subject to the following provisions:

Each month Nutanix shall provide to Flextronics an updated rolling forecast of its proposed purchases of Products for the next six (6) months. Flextronics should use such forecasts to plan for the procurement of Components and the manufacture of the Products. Except for Nutanix’ component inventory liability pursuant to section 2g below, such forecasts shall not be considered binding until Nutanix issues a purchase order for Products. Should Flextronics procure more Components than are needed to meet the 6 month forecast, Nutanix shall have no liability for the Components that are the subject of such excess procurement, unless such excess purchases were agreed for in writing (email is sufficient), e.g. in order to meet minimum order quantities, risk buys, etc.

Nutanix shall issue purchase orders for Product(s) to Flextronics. Flextronics will accept Nutanix purchase orders and provide a date of shipment of the Product(s) via electronic data interchange within two (2) hours. For the purpose of clarity, Flextronics does not have the right to reject a purchase order that is consistent with this MOU (including the then current pricing), or within Nutanix’s credit limit.

In acknowledging a purchase orders from Nutanix, Flextronics shall indicate the expected ship date for the Product. Flextronics shall make commercially reasonable efforts to meet the following lead times: for Products in which all the components are available in the supermarket, the lead time shall be delivery of the Product within [***] of receipt of the purchase order; and for orders which will be new builds, the lead time for delivery of the Product shall be within [***] of receipt of the purchase order.

The shipment and risk of loss for the distribution of the Products shall be [***]. Nutanix will provide Flextronics with any requested documentation and any necessary information, documentation or required assistance in order to determine the export license requirements for Nutanix products.

Nutanix may reschedule or cancel any purchase order up to the time of shipment.

Nutanix has provided Flextronics with a bill of materials (“BOM”) of third party components, raw materials, and parts (“Components”) to be included in the Products by Flextronics as part of the performance of the Services. Flextronics has agreed to provide line item pricing on the costed BOMs related to the Products. The fees charged by Flextronics to Nutanix for the Services performed for each Product shall be the [***]. The [***] shall be the Transformation Costs related to the Products (“Transformation Costs” are described further in Section 3 below). All prices are in U.S. Dollars, and Nutanix shall make all payments in US Dollars within [***] of the date of the invoice. If any [***]. If a Product has been shipped and it does not operate in conformance with the written specifications for the Product due to a breach of Flextronics’s warranty pursuant to Exhibit A (“DOA Product”), then Nutanix shall notify Flextronics of such DOA Product within [***] of the shipment date and Flextronics shall replace the DOA Product with a new Product. In such a situation, Flextronics shall be responsible for all freight charges related to return of the DOA Product and the shipment of the new Product.

Component Inventory.

Flextronics will manage availability of Components (inventory, SMI, CRP, etc.) sufficient to achieve [***] of the Nutanix monthly forecast. In addition, with [***] notice that Nutanix intends to order sufficient Products, Flextronics shall manage availability of Components (inventory, SMI, CRP, etc.) sufficient to achieve [***] of the Nutanix monthly forecast.

For Component demand greater than forecasted by Nutanix, Flextronics will use commercially reasonable efforts to prioritize Nutanix’ Component demand.

Nutanix agrees to purchase any Products (finished goods) and unique Nutanix work in process (“WIP”) that has been held by Flextronics for more than [***], or pay Flextronics to tear down such WIP and restock Components.

Nutanix and Flextronics shall jointly agree in writing on all Nutanix unique Components and non-cancellable and non-returnable Components (collectively “Custom Components”). For Custom Components that have been held by Flextronics for more than [***]. For any Custom Components that have been held by Flextronics between [***]. Nutanix will purchase any Custom Components held by Flextronics for more than [***]. Once a month, Nutanix and Flextronics will review the inventory report and determine inventory aging. Flextronics shall obtain Nutanix’s written approval prior to purchasing any Custom Components that exceed the applicable monthly forecasts.

Certain exceptional items, including but not limited to expedited freight, will be agreed upon in advance and in writing and will be charged separately by Flextronics and paid by Nutanix. The Parties have agreed that the [***] for the Transformation Costs shall be valid until [***] based on the forecasted sales by Flextronics to Nutanix beginning on [***] of a minimum of [***]. Transformation Costs include the following:

A revaluation process will be used in connection with quarterly pricing reviews between the Parties. The parties agree that material price will be reviewed and adjusted on a quarterly basis, and product quotes will be updated accordingly. For the term of this MOU, Component price changes will be identified and implemented as part of the revaluation process for Products. Any purchase order in backlog from Nutanix priced at the [***] pricing will be repriced to the new standard priced BOM plus the Transformation Costs described in this MOU. Any adjustments to the cost of Components due to a revaluation process must be completed before purchase orders are revalued. The Parties shall settle any price adjustment(s) at the beginning of the next Nutanix fiscal quarter as part of the revaluation process.

The Parties agree that time is of the essence in the performance of the Services. In the event that a Flextronics committed order is delayed by more than [***] from the committed shipment date due to reasons solely within Flextronics’s control, which shall include delays caused by subcontractors or suppliers selected by Flextronics, (“Late Delivery”), Nutanix shall be allowed to cancel such order at Nutanix’s sole discretion. [***].

Non-Recurring Expenses (“NRE”): Based on the current assumptions and based on information provided by Nutanix, the NREs for setting up the Nutanix business in Milpitas are as described below and Nutanix shall issue a purchase order for the amounts listed below [***] of the execution of this MOU:

For EDI setup: [***]; and

For Manufacturing Test Setup: [***].

This MOU shall continue to be in effect until it is terminated by either Party or until the Parties execute the MSA. The MOU may be terminated for any reason by either Party upon [***] written notice to the other Party.

Excluding payment obligations, neither Party shall be liable to the other Party if it is unable to perform its obligations for any cause beyond the reasonable control of the Party. Each Party will bear its own expenses incurred in connection with this MOU and the proposed engagement between the Parties.

The Parties will make commercially reasonable efforts to ensure that the time from execution of this MOU to first shipment of Products is approximately [***].

Neither Party may assign this MOU in whole or in part without the express written consent of the other Party except to each party’s respective affiliates. Such consent shall not be unreasonably withheld. Any permitted assignment of this MOU shall be binding upon and enforceable by and against the Parties’ successors and assigns, provided that any unauthorized assignment shall be null and void and constitute a breach of this MOU. This MOU shall be governed by and interpreted in accordance with the laws of the state of California.  Any dispute, claim or controversy arising from or related in any way to this MOU or the interpretation, application, breach, termination or validity thereof, will be submitted for resolution by binding arbitration in accordance with the Comprehensive Arbitration Rules & Procedures of JAMS.  The arbitration will be held in Santa Clara County, California and it shall be conducted in the English language.  Judgment on any award in arbitration may be entered in any court of competent jurisdiction.  Notwithstanding the above, each Party shall have the right to file in the Santa Clara, California state court or the federal courts in and for the Northern District of California an application for temporary or preliminary injunctive relief, writ of attachment, writ of possession, temporary protective order, and/or appointment of a receiver on the grounds that the arbitration award to which the applicant may be entitled may be rendered ineffectual in the absence of such relief.  IN THE EVENT OF ANY DISPUTE BETWEEN THE PARTIES, THE PARTIES HEREBY KNOWINGLY AND VOLUNTARILY AGREE THAT ANY AND ALL MATTERS SHALL BE DECIDED BY A JUDGE OR ARBITRATOR WITHOUT A JURY TO THE FULLEST EXTENT PERMISSIBLE UNDER APPLICABLE LAW. 

New Product Introduction (“NPI”) cost structure: Post go-live and from time to time, Nutanix may decide to develop and ask Flextronics to produce new products. Flextronics would charge Nutanix for certain costs associated with the NPI including but not limited to the cost of acquisition for any required equipment or tooling needed in production, or for any certifications required to support the new product. The parties agree to a [***] Transformation Cost (as described in item #4 above) or [***] the transformation rate for manufacturing, to convert existing part numbers to new top level assemblies (“TLA”). This charge does not include Components which will be priced separately. The parties agree that the number of NPI’s would not exceed [***] TLAs per quarter and the number of NPI Products to be tested would be [***].

Engineering Change Orders (“ECO”) price structure: Flextronics will support up to [***] ECOs per month within the current transformation cost noted in sections 3 and 13. The parties agree that for any volume above the [***] ECO processing charge would be utilized for each 2 hours’ effort in processing these additional ECO’s. Any inventory impacts or assembly cost impacts would be priced separately on each ECO.