AMENDMENT NO. 6 TO CONSIGNMENT AGREEMENT
EXHIBIT 10.1
AMENDMENT NO. 6 TO CONSIGNMENT AGREEMENT
THIS AMENDMENT NO. 6 TO CONSIGNMENT AGREEMENT (this Amendment) is made as of September 13, 2011, by and among CANADIAN IMPERIAL BANK OF COMMERCE, a Canadian chartered bank (the PM Lender); CIBC WORLD MARKETS INC., an Ontario corporation and subsidiary of the PM Lender (the Copper Lender and together with the PM Lender, the Metal Lenders); MATERION CORPORATION (f/k/a Brush Engineered Materials Inc.), an Ohio corporation (BEM); MATERION ADVANCED MATERIALS TECHNOLOGIES AND SERVICES INC. (f/k/a Williams Advanced Materials Inc.), a New York corporation (WAM); MATERION TECHNICAL MATERIALS INC. (f/k/a Technical Materials, Inc.), an Ohio corporation (TMI); MATERION BRUSH INC. (f/k/a Brush Wellman Inc.), an Ohio corporation (BWI); MATERION TECHNOLOGIES INC. (f/k/a Zentrix Technologies Inc.), an Arizona corporation (ZTI); MATERION BREWSTER LLC (f/k/a Williams Acquisition, LLC), a New York limited liability company d/b/a Pure Tech (Pure Tech); MATERION PRECISION OPTICS AND THIN FILM COATINGS CORPORATION (f/k/a Thin Film Technology, Inc.), a California corporation (TFT); MATERION LARGE AREA COATINGS LLC (f/k/a Techni-Met, LLC), a Delaware limited liability company (TML); MATERION ADVANCED MATERIALS TECHNOLOGIES AND SERVICES CORP. (f/k/a Academy Corporation), a New Mexico corporation (AC); MATERION ADVANCED MATERIALS TECHNOLOGIES AND SERVICES LLC (f/k/a Academy Gallup, LLC), a New Mexico limited liability company (AG); and such other Subsidiaries of BEM who may from time to time become parties by means of their execution and delivery with the Metal Lender of a Joinder Agreement under the Precious Metals Agreement (as defined below). BEM, WAM, TMI, BWI, ZTI, Pure Tech, TFT, TML, AC, AG and such Subsidiaries are herein sometimes referred to collectively as the Customers and each individually as a Customer.
WITNESSETH:
WHEREAS, the Metal Lenders and the Customers are parties to a certain Consignment Agreement, dated as of October 2, 2009, as amended by that certain (i) Amendment No. 1 to Consignment Agreement, dated as of March 10, 2010, (ii) Omnibus Amendment to Metal Documents, dated as of June 10, 2010, (iii) Amendment No. 3 to Consignment Agreement, dated as of September 30, 2010, (iv) Amendment No. 4 to Consignment Agreement, dated as of November 10, 2010, and (v) Amendment No. 5 to Consignment Agreement, dated as of March 7, 2011 (as amended, the Consignment Agreement); and
WHEREAS, the parties hereto desire to amend the Consignment Agreement as set forth herein;
NOW, THEREFORE, for value received and for other good and valuable consideration, the receipt and adequacy of which are hereby acknowledged, the parties hereto hereby agree as follows:
1. Defined Terms. Initially capitalized terms used but not defined in this Amendment have the meanings given to such terms in the Consignment Agreement.
2. Amendments.
(a) The definition of Material Indebtedness appearing in Section 1 of the Consignment Agreement is hereby amended by deleting the text $10,000,000 appearing therein and replacing it with $20,000,000.
(b) The definition of Maturity Date appearing in Section 1 of the Consignment Agreement is hereby amended and restated in its entirety to read as follows:
Maturity Date means September 30, 2012. Any obligations of the Customers under this Agreement that are not paid when due on or before the Maturity Date shall remain subject to the provisions of this Agreement until all Obligations are paid and performed in full.
(c) The definition of Senior Credit Agreement appearing in Section 1 of the Consignment Agreement is hereby amended and restated in its entirety to read as follows:
Senior Credit Agreement means that certain Amended and Restated Credit Agreement, dated as of July 13, 2011, among BEM, Materion Advanced Materials Technologies and Services Netherlands B.V., the other foreign Subsidiary borrowers party thereto from time to time, certain lenders party thereto from time to time, and JPMorgan Chase, N.A., as administrative agent, as may be amended, restated or supplemented, or refinanced or otherwise replaced from time to time. If the Senior Credit Agreement is hereafter amended, refinanced or otherwise replaced (including, without limitation, with an unsecured credit facility), the parties hereto shall negotiate in good faith to make appropriate modifications to this Agreement acceptable to the parties hereto, such that the applicable representations, warranties, agreements, covenants and Events of Default herein conform to their corresponding provisions of such amended, refinanced or replaced credit facility; provided, however, that the Metal Lenders will not be required to make any such modifications to the extent they would cause the Collateral Agent or the Metal Lenders to surrender, release or otherwise compromise their security interest in the Collateral.
(d) The last paragraph of Section 1 of the Consignment Agreement is hereby amended and restated in its entirety to read as follows:
To the extent not defined in this Section l, unless the context otherwise requires, accounting and financial terms used in this Agreement shall have the meanings attributed to them by GAAP (provided that, if BEM notifies the Metal Lenders that BEM requests an amendment to any provision hereof to eliminate the effect of any change occurring after the date hereof in GAAP or in the application thereof on the operation of such provision (or if the Metal Lenders notify BEM that they request an amendment to any provision hereof for such purpose), regardless of whether any such notice is given before or after such change in GAAP or in the application thereof, then such provision shall be interpreted on the basis of GAAP as in effect and applied immediately before such change shall have become effective until such notice shall have been withdrawn or such provision amended in accordance herewith), and all other terms contained in this Agreement shall have the meanings attributed to them by Article 9 of the Uniform Commercial Code in force in the State of New York, as of the date hereof to the extent the same are used or defined therein.
(e) Section 9.12 of the Consignment Agreement is hereby amended by (i) deleting the text fixed or capital appearing in clause (e) thereof, and (ii) inserting the following new clauses (j) and (k) immediately after clause (i) thereof:
(j) unsecured Indebtedness of a Customer (including unsecured Subordinated Indebtedness to the extent subordinated to the Obligations on terms reasonably acceptable to the Metal Lenders) in the form of publicly issued notes, to the extent not otherwise permitted under this Section 9.12, and any Indebtedness of a Customer constituting refinancings, renewals or replacements of any such Indebtedness; provided that (i) both immediately prior to and after giving effect (including giving effect on a pro forma basis) thereto, no Default or Event of Default shall exist or would result therefrom, (ii) such Indebtedness matures after, and does not require any scheduled amortization or other scheduled payments of principal prior to, the date that is 181 days after the Maturity Date (it being understood that any provision requiring an offer to purchase such Indebtedness as a result of change of control or asset sale shall not violate the foregoing restriction), (iii) such Indebtedness is not guaranteed by any Subsidiary of BEM that is not a Customer (which guarantees, if such Indebtedness is subordinated, shall be expressly subordinated to the Obligations on terms not less favorable to the Metal Lenders than the subordination terms of such Subordinated Indebtedness), (iv) the covenants applicable to such Indebtedness are not more onerous or more restrictive in any material respect (taken as a whole) than the applicable covenants set forth in this Agreement and (v) both immediately prior to and after giving effect (including giving effect on a pro forma basis) thereto, the Customers would be in compliance with Section 9.17; and
(k) other unsecured Indebtedness in an amount not in excess of $100,000,000.
(f) Section 9.14 of the Consignment Agreement is hereby amended by (i) deleting the text fixed or capital appearing in two places in clause (f) thereof, (ii) deleting the text $10,000,000 appearing in clause (g) thereof and replacing such text with $15,000,000 and (iii) deleting the text $10,000,000 appearing in clause (n) thereof and replacing such text with $20,000,000.
(g) Section 10.1 of the Consignment Agreement is hereby amended by (i) inserting the following text immediately before the first comma appearing in clause (b) thereof (including pursuant to Section 2.9), and (ii) deleting the text $5,000,000 appearing in clause (k) thereof and replacing such text with $20,000,000.
(h) Schedule 1 to the Consignment Agreement is hereby amended and restated in its entirety to read as set forth in Annex I hereto.
3. Removal of Silver Consignments. The parties hereto agree that, from and after the date of this Amendment: (a) the Consignment of Silver will no longer be permitted under the Consignment Agreement; (b) all references to Silver in the following provisions of the Consignment are hereby deleted: Article 1 and Section 2.1, 2.2, 2.3, 2.9 and 9.22 (collectively, the Silver Provisions); and (c) the Silver Provisions are hereby deemed further amended mutatis mutandis to accommodate the deletion of Silver references therefrom.
4. Representations and Warranties. To induce the Metal Lenders to enter into this Amendment, each Customer hereby represents and warrants to the Metal Lenders that: (a) such Customer has full power and authority, and has taken all action necessary, to execute and deliver this Amendment and to fulfill its obligations hereunder and to consummate the transactions contemplated hereby; (b) the making and performance by such Customer of this Amendment do not and will not violate any law or regulation of the jurisdiction of its organization or any other law or regulation applicable to it; (c) this Amendment has been duly executed and delivered by such Customer and constitutes the legal, valid and binding obligation of such Customer, enforceable against it in accordance with its terms, except as enforceability may be limited by bankruptcy, insolvency or similar laws affecting the enforcement of creditors rights generally and except as the same may be subject to general principles of equity; and (d) on and as of the date hereof, after giving effect to this Amendment, no Default or Event of Default exists under the Consignment Agreement.
5. Governing Law. This Amendment shall be governed by and construed in accordance with the laws of the State of New York applicable to contracts made and performed in such State.
6. Integration of Amendment into Consignment Agreement. The Consignment Agreement, as amended hereby, together with the other Metal Documents, is intended by the parties as the final, complete and exclusive statement of the transactions evidenced by the Consignment Agreement. All prior or contemporaneous promises, agreements and understandings, whether oral or written, are deemed to be superseded by the Consignment Agreement, as amended hereby, and no party is relying on any promise, agreement or understanding not set forth in the Consignment Agreement, as amended hereby. The Consignment Agreement, as amended hereby, may not be amended or modified except by a written instrument describing such amendment or modification executed by the Customers and the Metal Lenders. The parties hereto agree that this Amendment shall in no manner affect or impair the liens and security interests evidenced or granted by the Consignment Agreement or in connection therewith. Except as amended hereby, the Consignment Agreement shall remain in full force and effect and is in all respects hereby ratified and affirmed.
7. Expenses. The Customers covenant and agree jointly and severally to pay all reasonable out-of-pocket expenses, costs and charges incurred by the Metal Lenders (including reasonable fees and disbursement of counsel) in connection with the review and implementation of this Amendment.
8. Signatures. This Amendment may be executed by the parties hereto in several counterparts hereof and by the different parties hereto on separate counterparts hereof, each of which shall be an original and all of which shall together constitute one and the same agreement. Delivery of an executed signature page of this Amendment by electronic transmission shall be effective as an in hand delivery of an original executed counterpart hereof.
[this space left blank intentionally signature pages follow]
IN WITNESS WHEREOF, the undersigned parties have caused this Amendment to be executed by their duly authorized officers as of the date first written above.
CUSTOMERS: | ||
MATERION CORPORATION By: /s/ Michael C. Hasychak Michael C. Hasychak Vice President, Treasurer and Secretary | MATERION ADVANCED MATERIALS TECHNOLOGIES AND SERVICES INC. By: /s/ Michael C. Hasychak Michael C. Hasychak Vice President, Treasurer and Secretary | |
MATERION TECHNICAL MATERIALS INC. By: /s/ Michael C. Hasychak | MATERION BRUSH INC. By: /s/ Michael C. Hasychak | |
Michael C. Hasychak Vice President, Treasurer and Secretary | Michael C. Hasychak Vice President, Treasurer and Secretary | |
MATERION TECHNOLOGIES INC. By: /s/ Michael C. Hasychak | MATERION BREWSTER LLC By: /s/ Michael C. Hasychak | |
Michael C. Hasychak Chief Financial Officer and Secretary | Michael C. Hasychak Treasurer | |
MATERION PRECISION OPTICS AND THIN FILM COATINGS CORPORATION By: /s/ Gary W. Schiavoni Gary W. Schiavoni Secretary | MATERION LARGE AREA COATINGS LLC By: /s/ Gary W. Schiavoni Gary W. Schiavoni Asst. Secretary and Asst. Treasurer | |
MATERION ADVANCED MATERIALS TECHNOLOGIES AND SERVICES CORP. By: /s/ Richard W. Sager | MATERION ADVANCED MATERIALS TECHNOLOGIES AND SERVICES LLC | |
Richard W. Sager | By: /s/ Richard W. Sager | |
President | Richard W. Sager Manager | |
METAL LENDERS: | ||
CANADIAN IMPERIAL BANK OF COMMERCE By: /s/ Ian Cays | CIBC WORLD MARKETS INC. By: /s/ Ian Cays | |
Name: Ian Cays | Name: Ian Cays | |
Title: Executive Director | Title: Executive Director | |
ANNEX I
AMENDED AND RESTATED SCHEDULE 1 (APPROVED LOCATIONS)
SCHEDULE 1
APPROVED LOCATIONS
Approved Domestic Locations | ||
| ||
Materion Advanced Materials Technologies and Services Inc. (f/k/a Williams Advanced Materials Inc.) 2978 Main Street Buffalo, New York 14214 | Materion Technical Materials Inc. (f/k/a Technical Materials, Inc.) 5 Wellington Road Lincoln, Rhode Island 02865 | |
Materion Advanced Materials Technologies and Services Inc. (f/k/a Williams Advanced Materials Inc.) 2080 Lockport Road Wheatfield, New York 14304 | Materion Large Area Coatings LLC (f/k/a Techni-Met, LLC) 300 Lamberton Road Windsor, Connecticut 06095 | |
Materion Brewster LLC (f/k/a Williams Acquisition, LLC) 42 Mt. Ebo Road South Brewster, New York 10509 | Materion Large Area Coatings LLC (f/k/a Techni-Met, LLC) 30 East Newberry Rd. Bloomfield, Connecticut 06002 | |
Materion Precision Optics and Thin Film Coatings LLC (f/k/a Thin Film Technology, Inc.) 153 Industrial Way Buellton, CA 93427 | Cerac, inc. (a Materion Advanced Materials Technologies and Services site) 404-407 N. 13th St. and 1316 W. St. Paul St. Milwaukee, Wisconsin 53233 | |
Materion Technologies Inc. (f/k/a Zentrix Technologies Inc.) Newburyport Industrial Park 22 Graf Road Newburyport, Massachusetts 01950 | Materion Advanced Materials Technologies and Services Inc. (f/k/a Williams Advanced Materials Inc.) 3500 Thomas Rd, Suite C Santa Clara, California 95054 | |
Materion Brush Inc. (f/ka/ Brush Wellman Inc.) 14710 W. Portage River South Rd. Elmore, Ohio ###-###-#### | Materion Brush Inc. (f/ka/ Brush Wellman Inc.) 27555 College Park Drive Warren, Michigan 48088 | |
Materion Advanced Materials Technologies and Services Corp. (f/k/a Academy Corporation) 6905 Washington Avenue NE Albuquerque, New Mexico 87109 | Materion Advanced Materials Technologies and Services Corp. (f/k/a Academy Corporation) 5531 Midway Park Place NE Albuquerque, New Mexico 87109 | |
Materion Advanced Materials Technologies and Services Corp. (f/k/a Academy Corporation) 5520 Midway Park Place NE Albuquerque, New Mexico 87109 | Materion Advanced Materials Technologies and Services Corp. (f/k/a Academy Corporation) 5941 Midway Park Place NE Albuquerque, New Mexico 87109 | |
Materion Advanced Materials Technologies and Services LLC (f/k/a Academy Gallup, LLC) 1257 North Highway 491 Gallup, New Mexico 87301 | ||
Approved Foreign Locations | ||||
| ||||
Materion Advanced Materials | Materion Czech S.R.O. (f/k/a OMC | |||
Technologies and Services Far East | Scientific, Czech S.R.O) | |||
Pte. Ltd. (f/k/a Williams Advanced Materials Far East PTE Ltd.) 110 Paya Lebar Road #02-01 | Prumyslova ul. | |||
Singapore Warehouse | 440 01 Louny | |||
Singapore 409009 | Czech Republic | |||
Materion Advanced Materials | Seagate | |||
Technologies and Services Far East Pte. Ltd. (f/k/a Williams Advanced Materials Far East PTE Ltd.) 10 Arumugan Rd. | 1 Disc Drive | |||
Lion Industrial Bldg. | Springtown Industrial Estate | |||
Singapore Warehouse | Londonderry, Northern Ireland | |||
Singapore ###-###-#### | BT48 OBF United Kingdom | |||
Materion Advanced Materials | Materion Advanced Materials | |||
Technologies and Services Taiwan | Technologies and Services Suzhou Ltd. | |||
Co. Ltd. (f/k/a Williams Advanced | (f/k/a Williams Advanced Materials | |||
Materials Technology Taiwan Co., | (Suzhou) Ltd.) | |||
Ltd.) No. 19 Zhongxing 1st St. | No. 28, Su Tong Road | |||
Luzhu Shiang, Taoyuan County | Suzhou Industrial Park | |||
Taiwan, ROC | China 215021 | |||
Materion Ireland Holdings Limited | Materion Advanced Materials | |||
(f/k/a OMC Scientific Holdings | Technologies and Services Inc. (f/k/a | |||
Limited) | Williams Advanced Materials Inc.) | |||
Ballysimon Road | Philippines | |||
Limerick, Ireland | Bldg. 8365 Argionaut Highway | |||
Cubi Pt. | ||||
Subic Bay Freeport Zone | ||||
Philippines 2222 | ||||
Approved Refiners / Fabricators | ||||
| ||||
Coining of America | Johnson Matthey Limited | |||
280 Midland Avenue | 130 Glidden Road | |||
Saddle Brook, New Jersey 07663 | Brampton, Ontario, Canada L6W 3M8 | |||
Sigmund Cohn Corp. | Johnson Matthey | |||
121 South Columbus Avenue | Orchard Road | |||
Mount Vernon, New York 10553 | Royston, Hertfordshire, England SG8 5HE | |||
Sofield Mfg. | Johnson Matthey | |||
2 Main Street | 2001 Nolte Drive | |||
Ridgefield Park, New Jersey 07660 | West Deptford, New Jersey 08066 | |||
NuTec Metal Joining Products | Rohm & Haas Electric Materials LLC | |||
12999 Plaza Drive | 272 Buffalo Avenue | |||
Cleveland, Ohio 44193 | Freeport, New York 11520 | |||
BASF Catalysts, LLC | Sabin Metal Corp. | |||
554 Engelhard Drive | 300 Pantigo Place | |||
Seneca, South Carolina 29679 | East Hampton, New York 11937 | |||
Heraeus Metal Processing, Inc. | Seagate Technology | |||
13429 Alondra Blvd. | 7801 Computer Ave. | |||
Santa Fe Springs, California 90670 | Bloomington, MN 55435 | |||
Marian, Inc. | Marian, Inc. | |||
1011 East Saint Clair Street | 2787 South Freeman Road | |||
Indianapolis, Indiana 46202 | Monticello, Indiana 47960 | |||
Approved Subconsignees and Approved Subconsignee Locations | ||||||||||||||||
Honeywell | International Rectifier | 830 Arapaho Road | a Hexfet America Facility | Richardson, Texas 75081 | 41915 Business Park Drive Temecula, California 92590 | |||||||||||
Triquint Semiconductor | International Rectifier | 500 W. Renner Road | Cardiff Road | Richardson, Texas 75083-3938 | Newport South Wales, England NP10 8YJ | |||||||||||
Triquint Semiconductor | Hewlett Packard | 2300 N.E. Brookwood Pkwy. | 1055 NE Circle Blvd. | Hillsboro, Oregon 97124 | Chemical Storage Building Corvallis, OR 97330 | |||||||||||
Triquint Semiconductor | PPG Industries | 1818 Highway 441, S | 400 Park Drive, Works #6 | Apopka, Florida 32703 | Carlisle, Pennsylvania 17013 | |||||||||||
PPG Industries | PPG Industries | 7400 Central Freeway | 4004 Fairview Industrial Drive SE, Works #12 | Wichita Falls, Texas 76306 | Salem, Oregon 97302 | |||||||||||