THE USE OF THE FOLLOWING NOTATION IN THIS EXHIBIT INDICATES THAT THE CONFIDENTIAL PORTION HAS BEEN OMITTED PURSUANT TO A REQUEST FORCONFIDENTIAL TREATMENT AND THE OMITTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION: [***] IntelsatONESMNetwork Broadband Service Order No. 25811

Type of Service Order:

Master Service Agreement No: 21078, dated 25-Aug-2008

Account No: 123639

15-Feb-2013

Note: Intelsat reserves the right to reschedule/postpone the SSD if this Service Order is returned less than 6 business days before the stated SSD. Billing will commence on the SSD whether the Service commences or not, unless any delay Is caused solely and directly by Intelsat.

14-Oct-2018

Note: If the SSD Is delayed, the SED date will also be delayed by the same duration. The term of service will remain unchanged.

Appendix 1A: Service Details — Mountainside Teleport Master

Appendix 2A: Operational Contact Details

Appendix 3A: Co-Location Service Details

Appendix 1B: Service Details — Ellenwood Teleport Master

Appendix 2B: Operational Contact Details

Appendix 3B: Co-Location Service Details

Appendix 1C: Service Details — Napa Teleport Master

Appendix 2C: Operational Contact Details

Appendix 3C: Co-Location Service Details

Appendix 1D: Service Details — Perth Teleport Master

Appendix 2D: Operational Contact Details

Appendix 3D: Co-Location Service Details

Appendix 1E: Service Details — Kumsan Teleport Master

Appendix 2E: Operational Contact Details

Appendix 3E: Co-Location Service Details

Appendix 1F: Service Details — Brazil Teleport Master

Appendix 2F: Operational Contact Details

Appendix 3F: Co-Location Service Details

Appendix 4: Roles & Responsibilities of Intelsat and Customer

Appendix 5: Additional Terms & Conditions

/s/ Patricia Casey

/s/ Anand Chari

Patricia A. Casey

Anand K. Chari

SVP & Deputy General Counsel

CFO

November-20-2012

11/19/12

x Evolution DVB-S2 with ACM

(iDX 2.0.1 or higher)

x Hub Lease

(see appendix for details)

Satellite & location

Transponder No.

Intelsat to Customer site: MO29K

(Forward)

Customer site to Intelsat: MO29K

(Return)

Initial configuration:

Forward Minimum IP Data rate: To be determined as mutually agreed upon

Return IP Data rate: To be determined as mutually agreed upon

Forward Maximum¹ IP Data rate: To be determined as mutually agreed upon (equal to Minimum if ACM not used)

To Be Determined

([***] per Mbps aggregate (min IP data rate + return IP rate))

Modem type and model No:

Antenna Size:           m

G/T (mid-band)        dB/K

BUC/HPA size:          w

Tx gain (mid-band)    dBi

Number of Protocol Processor: 2

Number of NMS: 0

Number of Line Card: 3 XLC-11 (1 shelf spare card XLC-11 per Teleport)

Point A: One cm in front of the customer antenna feed

Point B: IFL connection to chassis

Point C: Ethernet connection of chassis

Point Z: Intelsat Internet access router port

Intelsat to Customer site: AT29K

(Forward)

Customer site to Intelsat: AT29K

(Return)

Initial configuration:

Forward Minimum IP Data rate: To be determined as mutually agreed upon

Return IP Data rate: To be determined as mutually agreed upon

Forward Maximum¹ IP Data rate: To be determined as mutually agreed upon (equal to Minimum if ACM not used)

To Be Determined

([***] per Mbps aggregate (min IP data rate + return IP rate))

Modem type and model No:

Antenna Size:           m

G/T (mid-band) dB/K

BUCIHPA size:          w

Tx gain (mid-band) dBi

Number of Protocol Processor:0 (See 513075-101-1)

Number of NMS: 0

Number of Line Card: 3 XLC-11

Point A: One cm in front of the customer antenna feed

Point B: IFL connection to chassis

Point C: Ethernet connection of chassis

Point Z: Intelsat Internet access router port

¨ N/A

x Yes (see Co-Location Service details)

¨ N/A

¨ To be provided by Customer                Local loop provider:

¨ Ready    ¨ Expected to be delivered by [DD Month]

Terminating Location (Interconnection point with Intelsat): (addresses are provided in Section VII)

Patch panel at Intelsat Teleport:

¨ Fuchsstadi ¨ Ellenwood x Mountainside ¨ Riverside ¨ Napa ¨ Bouen ¨ Kumsan

¨ Perth ¨ Brazil

Patch panel at Intelsat POP:

¨ McLean ¨ London ¨ Frankfurt x New York ¨ Los Angeles ¨ Atlanta ¨ Seoul ¨ Various

Circuit Type: E1 ¨     T1 ¨        T3/DS3 ¨  Ethernet Private Line x

Note: E3 interface is not available at POPs
Number of Circuits :

¨ To be provided by Intelsat

Terminating Location (Customer end location):

NPAINXX or phone number:                    Suite/Rack No.:        Address:

Global code: The DVB-S2 specification defines a concatenation of Low Density Parity Check (LDPC) code and Bose-Chaudhuri¬Hocquenghem (BCH) codes. This results in a higher FEC overhead reflected In link budgets by the global code rate.

Intelsat Network Broadband Service supports VolP and VPN by enabling clear dedicated access channel between the network hub and remote site modem. VolP/VPN support over Intelsat Network Broadband Service is limited to transport of VolP packets from the remote VSAT Units Ethernet port to Intelsat’s multi-homed Internet backbone. Selection of a VolP service provider and termination with them is expected to be arranged by the Customer. Similarly, provision of any VPN hardware and software for end-user’s end-to¬end secure application is expected to be arranged by the Customer. The Customer is also responsible for setting up VoIP/VPN functionalities, such as routing, gateway configuration, call setup, control, billing, etc.

x New York POP, Level 3, 111 8^th Avenue, Suite 304, New York, NY 10011, USA

x Various - For network diversity

Name: Alasdair Calder

Tel: (202) 944-6824

Email: ***@***

Name: Jeff Kimble

Tel: (202) 944-6805

Email: ***@***

***@***

***@*** (24 x7 x 365)

11 RU(s)

1 Rack(s)

Racks to be provided

¨ By Customer

x by Intelsat

The number of allowable power outlets without extra charge is limited to 1 per RU,

4 per half rack and 8 per full rack on the same power source. Additional power outlets are available in increments of 8 and are subject to an additional MRC of [***] for each set of 8 power outlets under the same power source. If a different power source is required, item #5 will apply. (*)

¨ Incoming dial-up access Number of lines:

x Internet access

Data rate:[***] Kbit/s

¨ Not required

Remote Internet access is available to allow customers to control and monitor equipment. Please indicate the data rate required for remote monitoring access (e.g. do not put the data rate here for your satellite carriers, but instead the rate for remote Internet access for equipment monitoring).

Outgoing phone lines are not available at the Teleport. Incoming dial-up access lines are subject to a location fee and a line rate dependent upon the amount charged by the local telecom providers. If Internet access is required, the co-located equipment must have an Ethernet port. (*)

x Yes - Customer agrees to be responsible for the interconnection to

CenturyLink located at 111 8th Ave., NYC

7 days a week 0800-1700: [***] (local time)

Note: Level 1 support labor is not Included in the co- location rack space charges. Labor will be invoiced for a minimum of one hour and then per additional half hour increment. Any additional special labor or material expenses will be charged at cost incurred [***].

Intelsat will provide the following services as part of Level 1 support when requested by the Customer to the NOC:

•   Re-booting of Customer equipment.

•   Changing cards as guided by Customer.

•   Customer must provide spare cards.

•   Swapping cards as advised by Customer.

•   Checking LED status, as requested and guided by the Customer.

x Evolution DVB-S2 with ACM

(iDX 2.0.1 or higher)

x Hub Lease

(see appendix for details)

Intelsat to Customer site: AM18K

(Forward)

Customer site to Intelsat: AM18K

(Return)

Initial configuration:

Forward Minimum IP Data rate: To be determined as mutually agreed upon

Return IP Data rate: To be determined as mutually agreed upon

Forward Maximum¹ IP Data rate: To be determined as mutually agreed upon (equal to Minimum if ACM not used)

To Be Determined

([***] per Mbps aggregate (min IP data rate + return IP rate))

Modem type and model No:

Antenna Size:            m

G/T (mid-band)         dB/K

BUC/HPA size:            w

Tx gain (mid-band)      dBi

Number of Protocol Processor: 2

Number of NMS: 0

Number of Line Card: 3 XLC-11 (1 shelf spare card XLC-11 per Teleport)

Point A: One cm in front of the customer antenna feed

Point B: IFL connection to chassis

Point C: Ethernet connection of chassis

Point Z: Intelsat Internet access router port

¨ N/A

x Yes (see Co-Location Service details)

¨ N/A

x Yes [***] Mbps via IntelsatOne (see Additional Terms and Conditions)

¨ N/A

¨ To be provided by Customer                    Local loop provider:

¨ Ready    ¨ Expected to be delivered by [DD Month]

Terminating Location (Interconnection point with Intelsat): (addresses are provided In Section VII)

Patch panel at Intelsat Teleport:

¨ Fuchsstadt x Ellenwood ¨ Mountainside ¨ Riverside ¨ Napa ¨ Bouen ¨ Kumsan

¨ Perth ¨ Brazil

Patch panel at Intelsat POP:

¨ McLean ¨ London ¨ Frankfurt x New York ¨ Los Angeles ¨ Atlanta ¨ Seoul x Various

Circuit Type: E1 ¨      T1 ¨            T3/DS3 ¨ Ethernet Private Line x

Note: E3 interface is not available at POPs
Number of Circuits :

¨ To be provided by Intelsat

Terminating Location (Customer end location):

NPAINXX or phone number:                    Suite/Rack No.:            Address:

Global code: The DVB-S2 specification defines a concatenation of Low Density Parity Check (LDPC) code and Bose-Chaudhuri¬Hocquenghem (BCH) codes. This results in a higher FEC overhead reflected In link budgets by the global code rate.

Intelsat Network Broadband Service supports VolP and VPN by enabling clear dedicated access channel between the network hub and remote site modem. VolP/VPN support over Intelsat Network Broadband Service is limited to transport of VolP packets from the remote VSAT Units Ethernet port to Intelsat’s multi-homed Internet backbone. Selection of a VolP service provider and termination with them is expected to be arranged by the Customer. Similarly, provision of any VPN hardware and software for end-user’s end-to-end secure application is expected to be arranged by the Customer. The Customer is also responsible for setting up VolP/VPN functionalities, such as routing, gateway configuration, call setup, control, billing, etc.

x New York POP, Level 3, 111 8^th Avenue, Suite 304, New York, NY 10011, USA

xVarious - For network diversity

Name: Alasdair Calder

Tel: (202) 944-6824

Email: ***@***

Name: Jeff Kimble

Tel: (202) 944-6805

Email: ***@***

***@***

***@*** (24 x7 x 365)

11 RU(s)

1 Rack(s)

Racks to be provided

¨ By Customer

x by Intelsat

The number of allowable power outlets without extra charge is limited to 1 per RU,

4 per half rack and 8 per full rack on the same power source. Additional power outlets are available in increments of 8 and are subject to an additional NRC of [***] for each set of 8 power outlets under the same power source. If a different power source is required, item #5 will apply. (*)

¨ Incoming dial-up access Number of lines:

x Internet access

Data rate:[***] Mbit/s

¨ Not required

Remote Internet access is available to allow customers to control and monitor equipment. Please indicate the data rate required for remote monitoring access (e.g. do not put the data rate here for your satellite carriers, but instead the rate for remote Internet access for equipment monitoring).

Outgoing phone lines are not available at the Teleport. Incoming dial-up access lines are subject to a location fee and a line rate dependent upon the amount charged by the local telecom providers. If Internet access is required, the co-located equipment must have an Ethernet port. (*)

x Yes - Customer agrees to be responsible for the interconnection to

CenturyLink located at 111 8th Ave., NYC

7 days a week 0800-1700: [***] (local time)

Note: Level 1 support labor is not Included in the co- location rack space charges. Labor will be invoiced for a minimum of one hour and then per additional half hour increment. Any additional special labor or material expenses will be charged at cost incurred [***].

Intelsat will provide the following services as part of Level 1 support when requested by the Customer to the NOC:

•   Re-booting of Customer equipment.

•   Changing cards as guided by Customer.

•   Customer must provide spare cards.

•   Swapping cards as advised by Customer.

•   Checking LED status, as requested and guided by the Customer.

x Evolution DVB-S2 with ACM

(iDX 2.0.1 or higher)

x Hub Lease

(see appendix for details)

Intelsat to Customer site: NW30K

(Forward)

Customer site to Intelsat: NW30K

(Return)

Initial configuration:

Forward Minimum IP Data rate: To be determined as mutually agreed upon

Return IP Data rate: To be determined as mutually agreed upon

Forward Maximum¹ IP Data rate: To be determined as mutually agreed upon (equal to Minimum if ACM not used)

To Be Determined

([***] per Mbps aggregate (min IP data rate + return IP rate))

Modem type and model No:

Antenna Size:            m

G/T (mid-band)         dB/K

BUC/HPA size:            w

Tx gain (mid-band)      dBi

Number of Protocol Processor: 2

Number of NMS: 0

Number of Line Card: 3 XLC-11 (1 shelf spare card XLC-11 per Teleport)

Point A: One cm in front of the customer antenna feed

Point B: IFL connection to chassis

Point C: Ethernet connection of chassis

Point Z: Intelsat Internet access router port

Intelsat to Customer site: NEP32K

(Forward)

Customer site to Intelsat: NEP32K

(Return)

Initial configuration:

Forward Minimum IP Data rate: To be determined as mutually agreed upon

Return IP Data rate: To be determined as mutually agreed upon

Forward Maximum’ IP Data rate: To be determined as mutually agreed upon (equal to Minimum if ACM not used)

Modem type and model No:

Antenna Sze:            m

G/T (mid-band) dB/K

BUC/HPA size:          w

Tx gain (mid-band) dBi

Number of Protocol Processor:0

Number of NMS: 0

Number of Line Card: 3 XLC-11

Point A: One cm in front of the customer antenna feed

Point B: IFL connection to chassis

Point C: Ethernet connection of chassis

Point Z: Intelsat Internet access router port

Intelsat to Customer site: SW3K

(Forward)

Customer site to Intelsat: SW3K

(Return)

Initial configuration:

Forward Minimum IP Data rate: To be determined as mutually agreed upon

Return IP Data rate: To be determined as mutually agreed upon

Forward Maximum¹ IP Data rate: To be determined as mutually agreed upon (equal to Minimum if ACM not used)

To Be Determined

([***] per Mbps aggregate (min IP data rate + return IP rate))

Modem type and model No:

Antenna Size:            m

G/T (mid-band) dB/K

BUC/HPA size:            w

Tx gain (mid-band) dBi

Number of Protocol Processor:0

Number of NMS: 0

Number of Line Card: 3 XLC-11

Point A: One cm in front of the customer antenna feed

Point B: IFL connection to chassis

Point C: Ethernet connection of chassis

Point Z: Intelsat Internet access router port

¨ N/A

x Yes [***] Mbps via IntelsatOne (see Additional Terms and Conditions)

¨ N/A

¨ To be provided by Customer Local loop provider:

¨ Ready    ¨ Expected to be delivered by [DD Month]

Terminating Location (Interconnection point with Intelsat): (addresses are provided In Section VII)

Patch panel at Intelsat Teleport:

¨ Fuchsstadt ¨ Ellenwood ¨ Mountainside ¨ Riverside x Napa ¨ Bouen ¨ Kumsan

¨ Perth ¨ Brazil

Patch panel at Intelsat POP:

¨ McLean ¨ London ¨ Frankfurt x New York ¨ Los Angeles ¨ Atlanta ¨ Seoul x Various

Circuit Type: E1 ¨      T1 ¨         T3/DS3 ¨  Ethernet Private Line x

Note: E3 interface is not available at POPs
Number of Circuits :

¨ To be provided by Intelsat

Terminating Location (Customer end location):

NPA/NXX or phone number:                    Suite/Rack No.:              Address:

Global code: The DVB-S2 specification defines a concatenation of Low Density Parity Check (LDPC) code and Bose-Chaudhuri¬Hocquenghem (BCH) codes. This results in a higher FEC overhead reflected in link budgets by the global code rate.

Intelsat Network Broadband Service supports VolP and VPN by enabling clear dedicated access channel between the network hub and remote site modem. VolP/VPN support over Intelsat Network Broadband Service is limited to transport of VolP packets from the remote VSAT Unit’s Ethernet port to Intelsat’s multi-homed Internet backbone. Selection of a VolP service provider and termination with them is expected to be arranged by the Customer. Similarly, provision of any VPN hardware and software for end-user’s end-to-end secure application is expected to be arranged by the Customer. The Customer is also responsible for setting up VolP/VPN functionalities, such as routing, gateway configuration, call setup, control, billing, etc.

x New York POP, Level 3, 111 8^th Avenue, Suite 304, New York, NY 10011, USA

x Various - For network diversity

Name: Alasdair Calder

Tel: (202) 944-6824

Email: ***@***

Name: Jeff Kimble

Tel: (202) 944-6805

Email: ***@***

***@***

***@*** (24 x7 x 365)

Note 1: Intelsat requires an exhaustive

inventory of the equipment to be installed at

Intelsat Teleport.

Note 2: All co-located equipment must be 19

inches rack mountable

Note 3: Intelsat does not bear any import

VAT, duties or shipment costs applicable to

the equipment not owned by Intelsat and

delivered to any Intelsat facility.

11 RU(s)

1 Rack(s)

Racks to be provided

¨ By Customer

x by Intelsat

¨ Incoming dial-up access Number of lines

x Internet access

Data rate: [***] Mbit/s

¨ Not required

Remote internet access is available to allow customers to control and monitor equipment. Please indicate the data rate required for remote monitoring access (e.g. do not put the data rate here for your satellite carriers, but instead the rate for remote Internet access for equipment monitoring).

Outgoing phone lines are not available at the Teleport. Incoming dial-up access lines are subject to a location fee and a line rate dependent upon the amount charged by the local telecom providers. If Internet access is required, the co-located equipment must have an Ethernet port. (*)

x Yes - Customer agrees to be responsible for the interconnection to

CenturyLink located at 111 8th Ave., NYC

7 days a week 0800-1700: [***] (local time)

Note: Level 1 support labor is not included in the co- location rack space charges. Labor will be invoiced for a minimum of one hour and then per additional half hour increment. Any additional special labor or material expenses will be charged at cost incurred [***].

Intelsat will provide the following services as part of Level 1 support when requested by the Customer to the NOC:

•    Re-booting of Customer equipment.

•    Changing cards as guided by Customer.

•    Customer must provide spare cards.

•    Swapping cards as advised by Customer.

•    Checking LED status, as requested and guided by the Customer.

x Evolution DVB-S2 with ACM

(iDX 2.0.1 or higher)

x Hub Lease

(see appendix for details)

Intelsat to Customer site: ANZ9K

                 (Forward)

Customer site to Intelsat: ANZ9K

                 (Return)

Initial configuration:

Forward Minimum IP Data rate: To be determined as mutually agreed upon

Return IP Data rate: To be determined as mutually agreed upon

Forward Maximum¹ IP Data rate: To be determined as mutually agreed upon (equal to Minimum if ACM not used)

To Be Determined

([***] per Mbps aggregate (min IP data rate + return IP rate))

Modem type and model No:

Antenna Size:                m

G/T (mid-band)             dB/K

BUC/HPA size:            w

Tx gain (mid-band)      dBi

Number of Protocol Processor: 2

Number of NMS: 0

Number of Line Card: 3 XLC-11 (1 shelf spare card XLC-11)

Point A: One cm in front of the customer antenna feed

Point B: IFL connection to chassis

Point C: Ethernet connection of chassis

Point Z: Intelsat Internet access router port

Service ID No. 513075-402 Co-Location

Service ID No. 513075-403 Ethernet Private Line Connectivity

¨ N/A

x Yes [***] Mbps via IntelsatOne (see Additional Terms and Conditions)

¨ N/A

¨ To be provided by Customer Local loop provider:

¨ Ready    ¨ Expected to be delivered by [DD Month]

Terminating Location (Interconnection point with Intelsat): (addresses are provided In Section VII)

Patch panel at Intelsat Teleport:

¨ Fuchsstadt   ¨ Ellenwood   ¨ Mountainside     ¨ Riverside   ¨ Napa   ¨ Bouen   ¨ Kumsan

x Perth   ¨ Brazil

Patch panel at Intelsat POP:

¨ McLean   ¨ London   ¨ Frankfurt   x New York   ¨ Los Angeles   ¨ Atlanta   ¨ Seoul   x Various

Circuit Type: E1   ¨ T1   ¨ T3/DS3   ¨ Ethernet Private Line   x

Note: E3 interface is not available at POPs
Number of Circuits :

¨ To be provided by Intelsat

Terminating Location (Customer end location):

NPA/NXX or phone number:                    Suite/Rack No.:            Address:

Global code: The DVB-S2 specification defines a concatenation of Low Density Parity Check (LDPC) code and Bose-Chaudhuri¬Hocquenghem (BCH) codes. This results in a higher FEC overhead reflected In link budgets by the global code rate.

Intelsat Network Broadband Service supports VolP and VPN by enabling clear dedicated access channel between the network hub and remote site modem. VolP/VPN support over Intelsat Network Broadband Service is limited to transport of VolP packets from the remote VSAT Units Ethernet port to Intelsat’s multi-homed Internet backbone. Selection of a VolP service provider and termination with them is expected to be arranged by the Customer. Similarly, provision of any VPN hardware and software for end-user’s end-to-end secure application is expected to be arranged by the Customer. The Customer is also responsible for setting up VolP/VPN functionalities, such as routing, gateway configuration, call setup, control, billing, etc.

Earth Station Manager

Street address

City

Country

Phone

Fax

Mobile

E-mail address

x New York POP, Level 3, 111 8^th Avenue, Suite 304, New York, NY 10011, USA

x Various - For network diversity

Name: Alasdair Calder

Tel: (202) 944-6824

Email: ***@***

Name: Jeff Kimble

Tel: (202) 944-6805

Email: ***@***

***@***

***@*** (24 x7 x 365)

Note 1: Intelsat requires an exhaustive inventory of the equipment to be installed at Intelsat Teleport.

Note 2: All co-located equipment must be 19 Inches rack mountable

Note 3: Intelsat does not bear any import VAT, duties or shipment costs applicable to the equipment not owned by Intelsat and delivered to any Intelsat facility.

11 RU(s)

1 Rack(s)

Racks to be provided

¨ By Customer

x by Intelsat

The number of allowable power outlets without extra charge is limited to 1 per RU,

4 per half rack and 8 per full rack on the same power source. Additional power outlets are available in increments of 8 and are subject to an additional NRC of [***] for each set of 8 power outlets under the same power source. If a different power source is required, item #5 will apply. (*)

¨ Incoming dial-up access Number of lines:

x Internet access

Data rate: [***] Mbit/s

¨ Not required

Remote Internet access is available to allow customers to control and monitor equipment. Please indicate the data rate required for remote monitoring access (e.g. do not put the data rate here for your satellite carriers, but instead the rate for remote Internet access for equipment monitoring).

Outgoing phone lines are not available at the Teleport. Incoming dial-up access lines are subject to a location fee and a line rate dependent upon the amount charged by the local telecom providers. If Internet access is required, the co-located equipment must have an Ethernet port. (*)

x Yes - Customer agrees to be responsible for the interconnection to

CenturyLink located at 111 8th Ave., NYC

7 days a week 0800-1700: [***]

Note: Level 1 support labor is not included in the co- location rack space charges. Labor will be invoiced for a minimum of one hour and then per additional half hour increment. Any additional special labor or material expenses will be charged at cost incurred [***].

Intelsat will provide the following services as part of Level 1 support when requested by the Customer to the NOC:

•   Re-booting of Customer equipment.

•   Changing cards as guided by Customer.

•   Customer must provide spare cards.

•   Swapping cards as advised by Customer.

•   Checking LED status, as requested and guided by the Customer.

x Evolution DVB-S2 with ACM

(iDX 2.0.1 or higher)

x Hub Lease

(see appendix for details)

Intelsat to Customer site: MOK36K

(Forward)

Customer site to Intelsat: MO36K

(Return)

Initial configuration:

Forward Minimum IP Data rate: To be determined as mutually agreed upon

Return IP Data rate: To be determined as mutually agreed upon

Forward Maximum¹ IP Data rate: To be determined as mutually agreed upon (equal to Minimum if ACM not used)

To Be Determined

([***] per Mbps aggregate (min IP data rate + return IP rate))

Modem type and model No:

Antenna Size:           m

G/T (mid-band)        dB/K

BUC/HPA size:          w

Tx gain (mid-band)    dBl

Number of Protocol Processor: 2

Number of NMS: 0

Number of Line Card: 3 XLC-11 (1 spare card XLC-11)

Point A: One cm in front of the customer antenna feed

Point B: IFL connection to chassis

Point C: Ethernet connection of chassis

Point Z: Intelsat Internet access router port

¨ N/A

x Yes (see Co-Location Service details)

¨ N/A

¨ To be provided by Customer Local loop provider:

¨ Ready  ¨ Expected to be delivered by [DD Month]

Terminating Location (Interconnection point with Intelsat): (addresses are provided in Section VII)

Patch panel at Intelsat Teleport:

¨ Fuchsstadt ¨ Ellenwood ¨ Mountainside ¨ Riverside ¨ Napa ¨ Bouen x Kumsan

¨ Perth ¨ Brazil

Patch panel at Intelsat POP:

¨ McLean ¨ London ¨ Frankfurt x New York ¨ Los Angeles ¨ Atlanta ¨ Seoul x Various

Circuit Type: E1 ¨     T1 ¨        T3/DS3 ¨  Ethernet Private Line x

Note: E3 interface is not available at POPs
Number of Circuits :

¨ To be provided by Intelsat

Terminating Location (Customer end location):

NPA/NXX or phone number:                    Suite/Rack No.:        Address:

Global code: The DVB-S2 specification defines a concatenation of Low Density Parity Check (LDPC) code and Bose-Chaudhuri¬Hocquenghem (BCH) codes. This results in a higher FEC overhead reflected In link budgets by the global code rate.

Intelsat Network Broadband Service supports VolP and VPN by enabling clear dedicated access channel between the network hub and remote site modem. VolP/VPN support over Intelsat Network Broadband Service is limited to transport of VolP packets from the remote VSAT Units Ethernet port to Intelsat’s multi-homed Internet backbone. Selection of a VolP service provider and termination with them is expected to be arranged by the Customer. Similarly, provision of any VPN hardware and software for end-user’s end-to-end secure application is expected to be arranged by the Customer. The Customer is also responsible for setting up VolP/VPN functionalities, such as routing, gateway configuration, call setup, control, billing, etc.

x New York POP, Level 3, 111 8^th Avenue, Suite 304, New York, NY 10011, USA

x Various - For network diversity

Name: Alasdair Calder

Tel: (202) 944-6824

Email: ***@***

Name: Jeff Kimble

Tel: (202) 944-6805

Email: ***@***

***@***

***@*** (24 x7 x 365)

Note 1: Intelsat requires an exhaustive

inventory of the equipment to be installed at

Intelsat Teleport.

Note 2: All co-located equipment must be 19

Inches rack mountable

Note 3: Intelsat does not bear any import

VAT, duties or shipment costs applicable to

the equipment not owned by Intelsat and

delivered to any Intelsat facility.

11 RU(s)

1 Rack(s)

Racks to be provided

¨ By Customer

x by Intelsat

¨ Incoming dial-up access Number of lines

x Internet access

Data rate: [***] Kbit/s

¨ Not required

Remote Internet access is available to allow customers to control and monitor equipment. Please indicate the data rate required for remote monitoring access (e.g. do not put the data rate here for your satellite carriers, but instead the rate for remote Internet access for equipment monitoring).

Outgoing phone lines are not available at the Teleport. Incoming dial-up access lines are subject to a location fee and a line rate dependent upon the amount charged by the local telecom providers. If Internet access is required, the co-located equipment must have an Ethernet port. (*)

x Yes - Customer agrees to be responsible for the interconnection to

CenturyLink located at 111 8th Ave., NYC

7 days a week 0800-1700: [***] (local time)

Note: Level 1 support labor is not included in the co- location rack space charges. Labor will be invoiced for a minimum of one hour and then per additional half hour increment. Any additional special labor or material expenses will be charged at cost incurred [***].

Intelsat will provide the following services as part of Level 1 support when requested by the Customer to the NOC:

•   Re-booting of Customer equipment.

•   Changing cards as guided by Customer.

•   Customer must provide spare cards.

•   Swapping cards as advised by Customer.

•   Checking LED status, as requested and guided by the Customer.

x Evolution DVB-S2 with ACM

(iDX 2.0.1 or higher)

x Hub Lease

(see appendix for details)

Service ID No. 513075-601 Uplink/Downlink and Hub (NBB-T)

Initial configuration:

Forward Minimum IP Data rate: To be determined as mutually agreed upon

Return IP Data rate: To be determined as mutually agreed upon

Forward Maximum¹ IP Data rate: To be determined as mutually agreed upon (equal to Minimum if ACM not used)

To Be Determined

([***] per Mbps aggregate (min IP data rate + return IP rate))

Number of Protocol Processor: 2

Number of NMS: 0

Number of Line Card: 3 XLC-11 (1 spare card XLC-11)

Point A: One cm in front of the customer antenna feed

Point B: IFL connection to chassis

Point C: Ethernet connection of chassis

Point Z: Intelsat Internet access router port

Service ID No. 513075-602 Co-Location

¨ N/A

x Yes (see Co-Location Service details )

Service ID No. 513075-603 Ethernet Private Line Connectivity

¨ N/A

x Yes [***] Mbps via IntelsatOne (see Additional Terms and Conditions)

¨ N/A

¨ To be provided by Customer Local loop provider:

¨ Ready  ¨ Expected to be delivered by [DD Month]

Terminating Location (Interconnection point with Intelsat):            (addresses are provided In Section VII)

Patch panel at Intelsat Teleport:

¨ Fuchsstadt ¨ Ellenwood ¨ Mountainside ¨ Riverside ¨ Napa ¨ Bouen ¨ Kumsan

¨ Perth x Brazil

Patch panel at Intelsat POP:

¨ McLean ¨ London ¨ Frankfurt x New York ¨ Los Angeles ¨ Atlanta ¨ Seoul x Various

Circuit Type: E1 ¨    T1 ¨        T3/DS3 ¨  Ethernet Private Line x

Note: E3 interface is not available at POPs
Number of Circuits :

¨ To be provided by Intelsat

Terminating Location (Customer end location):

NPA/NXX or phone number:                    Suite/Rack No.:        Address:

Service ID No. 513075-604

Global code: The DVB-S2 specification defines a concatenation of Low Density Parity Check (LDPC) code and Bose-Chaudhuri-Hocquenghem (BCH) codes. This results in a higher FEC overhead reflected in link budgets by the global code rate.

Intelsat Network Broadband Service supports VolP and VPN by enabling clear dedicated access channel between the network hub and remote site modem. VolP/VPN support over Intelsat Network Broadband Service is limited to transport of VolP packets from the remote VSAT Unit’s Ethernet port to Intelsat’s multi-homed Internet backbone. Selection of a VolP service provider and termination with them is expected to be arranged by the Customer. Similarly, provision of any VPN hardware and software for end-user’s end-to-end secure application is expected to be arranged by the Customer. The Customer is also responsible for setting up VoIP/VPN functionalities, such as routing, gateway configuration, call setup, control, billing, etc.

Customer End User Helpdesk

Customer Earth Station Contact

Intelsat Contact Details

Name: Alasdair Calder

Tel: (202) 944-6824

Email: ***@***

Name: Jeff Kimble

Tel: (202) 944-6805

Email: ***@***

***@***

***@*** (24 x 7 x 365)

Name: Rio Teleport

No.

Vendor

Equipment Type/Model No.

Quantity

Rack Units

Note 1: Intelsat requires an exhaustive inventory of the equipment to be installed at Intelsat Teleport.

Note 2: All co-located equipment must be 19 Inches rack mountable

Note 3: Intelsat does not bear any import VAT, duties or shipment costs applicable to the equipment not owned by Intelsat and delivered to any Intelsat facility.

Service-Details

Notes / Service terms

11 RU(s)

1 Rack(s)

Racks to be provided

¨ By Customer

x by Intelsat

2x20 Amps power sources

each (total 40Amps)

¨ Incoming dial-up access Number of lines:

x Internet access

Data rate:[***] Kbit/s

¨ Not required

Remote Internet access is available to allow customers to control and monitor equipment. Please indicate the data rate required for remote monitoring access (e.g. do not put the data rate here for your satellite carriers, but instead the rate for remote Internet access for equipment monitoring).

Outgoing phone lines are not available at the Teleport. Incoming dial-up access lines are subject to a location fee and a line rate dependent upon the amount charged by the local telecom providers. If Internet access is required, the co-located equipment must have an Ethernet port. (*)

Service-Details

Notes / Service terms

x Yes - Customer agrees to be responsible for the interconnection to

CenturyLink located at 111 8th Ave., NYC

7 days a week 0800-1700: [***]

Note: Level 1 support labor is not included in the co- location rack space charges. Labor will be invoiced for a minimum of one hour and then per additional half hour increment. Any additional special labor or material expenses will be charged at cost incurred [***].

Intelsat will provide the following services as part of Level 1 support when requested by the Customer to the NOC:

•    Re-booting of Customer equipment.

•    Changing cards as guided by Customer.

•    Customer must provide spare cards.

•    Swapping cards as advised by Customer.

•    Checking LED status, as requested and guided by the Customer.

Intelsat

after notification by Gogo

• Set up/ modification of assignment of remotes to carriers

• Set up / modification of Q05 profiles

Gogo with support of Intelsat

CMC

Over the air by Gogo.

Remote support by Gogo

Intelsat

(for Intelsat satellites only)