THIRD AMENDMENT AGREEMENT

EX-10.1 2 l42484exv10w1.htm EX-10.1 exv10w1
Exhibit 10.1
THIRD AMENDMENT AGREEMENT
     This THIRD AMENDMENT AGREEMENT (this “Amendment”) is made as of the 1st day of April, 2011 among:
     (a) GIBRALTAR INDUSTRIES, INC., a Delaware corporation (“Gibraltar”);
     (b) GIBRALTAR STEEL CORPORATION OF NEW YORK, a New York corporation (“GSNY” and, together with Gibraltar, collectively, “Borrowers” and, individually, each a “Borrower”);
     (c) the Lenders, as defined in the Credit Agreement, as hereinafter defined;
     (d) KEYBANK NATIONAL ASSOCIATION, as the lead arranger, sole book runner and administrative agent for the Lenders under the Credit Agreement (“Agent”);
     (e) JPMORGAN CHASE BANK, N.A. and BMO CAPITAL MARKETS FINANCING, INC, as co-syndication agents; and
     (f) HSBC BANK USA, NATIONAL ASSOCIATION and MANUFACTURERS AND TRADERS TRUST COMPANY, as co-documentation agents.
     WHEREAS, Borrowers, Agent and the Lenders are parties to that certain Third Amended and Restated Credit Agreement, dated as of July 24, 2009, that provides, among other things, for loans and letters of credit aggregating Two Hundred Million Dollars ($200,000,000), all upon certain terms and conditions (as amended and as the same may from time to time be further amended, restated or otherwise modified, the “Credit Agreement”);
     WHEREAS, Borrowers, Agent and the Lenders desire to amend the Credit Agreement to modify certain provisions thereof and add certain provisions thereto;
     WHEREAS, each capitalized term used herein and defined in the Credit Agreement, but not otherwise defined herein, shall have the meaning given such term in the Credit Agreement; and
     WHEREAS, unless otherwise specifically provided herein, the provisions of the Credit Agreement revised herein are amended effective as of the date of this Amendment;
     NOW, THEREFORE, in consideration of the premises and of the mutual covenants herein and for other valuable consideration, the receipt and sufficiency of which is hereby acknowledged, Borrowers, Agent and the Lenders agree as follows:
     1. Amendment to Definitions in the Credit Agreement. Section 1.1 of the Credit Agreement is hereby amended to delete the definition of “Borrowing Base” therefrom and to insert in place thereof the following:

 


 

     “Borrowing Base” means an amount equal to the total of the following:
     (a) up to eighty-five percent (85%) of the aggregate amount due and owing on Eligible Accounts Receivable of each Borrowing Base Company; plus
     (b) during the Special D.S. Brown Borrowing Base Period, up to fifty percent (50%) of the aggregate amount due and owing on the Agreed D.S. Brown Eligible Accounts Receivable; plus
     (c) the lowest of:
     (i) the sum of:
     (A) the lesser of:
     (1) up to sixty-five percent (65%) of the aggregate of the cost or market value (whichever is lower), as determined on a first-in first-out basis in accordance with GAAP, of the Eligible Inventory of each Borrowing Base Company; and
     (2) the cost or market value (whichever is lower), as determined on a first-in first-out basis in accordance with GAAP, of Eligible Inventory, multiplied by up to eighty-five percent (85%) of the Appraised Inventory NOLV Percentage; plus
     (B) during the Special D.S. Brown Borrowing Base Period, up to forty percent (40%) of the aggregate of the cost or market value (whichever is lower), as determine on a first-in first-out basis in accordance with GAAP, of the Agreed D.S. Brown Eligible Inventory; and
     (ii) One Hundred Million Dollars ($100,000,000); plus
     (d) the Fixed Asset Advance; minus
     (e) Reserves for Designated Hedge Agreements established pursuant to Section 2.13(b) hereof; minus
     (f) other Reserves, if any;
    provided that, anything herein to the contrary notwithstanding, Agent shall at all times have the right to reduce such percentages or dollar amount caps from time to time, in its reasonable credit judgment.

2


 

     2. Additions to Definitions in the Credit Agreement. Section 1.1 of the Credit Agreement is hereby amended to add the following new definitions thereto:
     “Agreed D.S. Brown Eligible Account Receivable” means an Account that is an account receivable (i.e., each specific invoice) of D.S. Brown that would, if D.S. Brown was a Borrowing Base Company, meet the requirements of an Eligible Account Receivable, as determined by Agent in its reasonable discretion.
     “Agreed D.S. Brown Eligible Inventory” means Inventory of D.S. Brown that would, if D.S. Brown was a Borrowing Base Company, meet the requirements of Eligible Inventory, as determined by Agent in its reasonable discretion.
     “D.S.B. Holding” means D.S.B. Holding Corp., a Delaware corporation.
     “D.S. Brown” means The D.S. Brown Company, an Ohio corporation.
     “D.S. Brown Acquisition” means the Acquisition by Gibraltar of all of the outstanding equity interests of D.S.B. Holding pursuant to the D.S. Brown Acquisition Documents.
     “D.S. Brown Acquisition Date” means the date that the D.S. Brown Acquisition is consummated, pursuant to the D.S. Brown Acquisition Documents.
     “D.S. Brown Acquisition Documents” means the D.S. Brown Purchase Agreement and each other document executed and delivered in connection therewith.
     “D.S. Brown Purchase Agreement” means that certain Stock Purchase Agreement, dated as of March 10, 2011, by and among the stockholders of D.S.B. Holding and Gibraltar.
     “Special D.S. Brown Borrowing Base Period” means the period from the D.S. Brown Acquisition Date to the earlier of (a) the date D.S. Brown becomes a Borrowing Base Company pursuant to Section 2.15 hereof, or (b) forty-five (45) days after the D.S. Brown Acquisition Date.
     3. Amendment to Addition of Borrowing Base Company Provisions. Section 2.15 of the Credit Agreement is hereby amended to delete subsection (a) therefrom and to insert in place thereof the following:
     (a) such Domestic Subsidiary shall have complied with all requirements of Section 5.20 hereof,
     4. Amendment to Acquisition Covenant Provisions. Section 5.13 of the Credit Agreement is hereby amended to delete subsections (e), (g) and (h) therefrom and to insert in place thereof, respectively, the following:

3


 

     (e) if the Accounts and Inventory acquired in connection with such Acquisition are proposed to be included in the determination of the Borrowing Base, Agent shall have conducted a field examination and appraisal of such Accounts and Inventory to its reasonable satisfaction; provided that, with respect to the D.S. Brown Acquisition, such field examination and appraisal may be conducted within forty-five (45) days after the D.S. Brown Acquisition Date;
     (g) Borrowers shall have provided to Agent, at least five Business Days prior to such Acquisition, historical financial statements of the target entity and a pro forma financial statement of the Companies accompanied by a certificate of a Financial Officer showing (i) pro forma compliance with Section 5.7 hereof, both before and after giving effect to the proposed Acquisition, (ii) Revolving Credit Availability of no less than Fifty Million Dollars ($50,000,000) after giving effect to such Acquisition, and (iii) that the target entity has generated positive Target EBITDA (excluding proposed synergies or other post acquisition actions or enhancements) for the most recently completed twelve (12) consecutive calendar months prior to such Acquisition; provided that compliance with subpart (ii) above shall not be required with respect to the D.S. Brown Acquisition, unless any Company shall have made a significant asset disposition subsequent to January 28, 2011 and prior to the D.S. Brown Acquisition Date; and
     (h) the aggregate Consideration paid by the Companies for such Acquisition:
     (i) shall not exceed the aggregate amount of Seventy-Five Million Dollars ($75,000,000) (except that the D.S. Brown Acquisition may be for aggregate Consideration of up to One Hundred Five Million Dollars ($105,000,000), so long as the D.S. Brown Acquisition occurs prior to April 30, 2011); and
     (ii) when added to all other Acquisitions (including the D.S. Brown Acquisition) for all Companies during the Commitment Period, shall not exceed the aggregate amount of One Hundred Fifty Million Dollars ($150,000,000).
     5. Amendment to Deposit and Securities Accounts Provisions. Article VI of the Credit Agreement is hereby amended to delete Section 6.19 therefrom and to insert in place thereof the following:
     Section 6.19. Deposit and Securities Accounts. Borrowers have provided to Agent a list of all banks, other financial institutions and Securities Intermediaries at which any Credit Party maintains Deposit Accounts or Securities Accounts as of the D.S. Brown Acquisition Date, which list correctly identifies the name, address and telephone number of each such financial institution or Securities Intermediary, the name in which the account is held, a description of the purpose of the account, and the complete account number therefor.

4


 

     6. Amendment to Schedules After the D.S. Brown Acquisition Date. Upon the acceptance by Agent of the updated Schedules to the Credit Agreement pursuant to Section 8 hereof, the Credit Agreement shall be amended to delete Schedule 2 (Guarantors of Payment), Schedule 3 (Borrowing Base Companies), Schedule 4 (Real Property), Schedule 5 (Pledged Securities), Schedule 6.1 (Corporate Existence; Subsidiaries; Foreign Qualification), Schedule 6.9 (Locations), Schedule 6.17 (Intellectual Property) and Schedule 6.19 (Deposit Accounts) therefrom, and to insert in place thereof, respectively, a new Schedule 2, Schedule 3, Schedule 4, Schedule 5, Schedule 6.1, Schedule 6.9, Schedule 6.17 and Schedule 6.19.
     7. Closing Deliveries. Concurrently with the execution of this Amendment, Borrowers shall:
     (a) cause each Guarantor of Payment to execute the attached Guarantor Acknowledgment and Agreement; and
     (b) pay all legal fees and expenses of Agent in connection with this Amendment and any other Loan Documents.
     8. Required Deliveries After the D.S. Brown Acquisition. On or before each of the dates specified in this Section 8, Borrowers shall satisfy each of the items specified in the subparts below:
     (a) within twenty (20) days after the D.S. Brown Acquisition Date, unless a longer period is agreed to by Agent in writing, Borrowers shall deliver to Agent the following replacement Schedules to the Credit Agreement, in each case, as may be requested by Agent, to be in form and substance acceptable to Agent and giving effect to the D.S. Brown Acquisition: Schedule 2 (Guarantors of Payment), Schedule 3 (Borrowing Base Companies), Schedule 4 (Real Property), Schedule 5 (Pledged Securities), Schedule 6.1 (Corporate Existence; Subsidiaries; Foreign Qualification), Schedule 6.9 (Locations), Schedule 6.17 (Intellectual Property) and Schedule 6.19 (Deposit Accounts); and
     (b) within ten days after the D.S. Brown Acquisition Date, unless a longer period is agreed to by Agent in writing, Borrowers shall cause D.S.B. Holding and any Subsidiary of D.S.B. Holding (other than a Non-Material Subsidiary) to deliver to Agent:
     (i) an executed joinder agreement to the Guaranty of Payment, such agreement to be prepared by Agent and in form and substance acceptable to Agent;
     (ii) an executed joinder agreement to the Pledge and Security Agreement, such agreement to be prepared by Agent and in form and substance acceptable to Agent;

5


 

     (iii) such other supporting documentation, Security Documents, corporate governance documents, authorization documents, lien searches and an opinion of counsel as may be deemed necessary or advisable by Agent.
     9. Representations and Warranties. Borrowers hereby represent and warrant to Agent and the Lenders that (a) Borrowers have the legal power and authority to execute and deliver this Amendment; (b) the officers executing this Amendment have been duly authorized to execute and deliver the same and bind Borrowers with respect to the provisions hereof; (c) the execution and delivery hereof by Borrowers and the performance and observance by Borrowers of the provisions hereof do not violate or conflict with the Organizational Documents of Borrowers or any law applicable to Borrowers or result in a breach of any provision of or constitute a default under any other agreement, instrument or document binding upon or enforceable against Borrowers; (d) no Default or Event of Default exists, nor will any occur immediately after the execution and delivery of this Amendment or by the performance or observance of any provision hereof; (e) each of the representations and warranties contained in the Loan Documents is true and correct in all material respects as of the date hereof as if made on the date hereof, except to the extent that any such representation or warranty expressly states that it relates to an earlier date (in which case such representation or warranty is true and correct in all material respects as of such earlier date); (f) Borrowers are not aware of any claim or offset against, or defense or counterclaim to, Borrowers’ obligations or liabilities under the Credit Agreement or any Related Writing; and (g) this Amendment constitutes a valid and binding obligation of Borrowers in every respect, enforceable in accordance with its terms.
     10. Waiver and Release. Borrowers, by signing below, hereby waive and release Agent and each of the Lenders, and their respective directors, officers, employees, attorneys, affiliates and subsidiaries, from any and all claims, offsets, defenses and counterclaims of which Borrowers are aware, such waiver and release being with full knowledge and understanding of the circumstances and effect thereof and after having consulted legal counsel with respect thereto.
     11. References to Credit Agreement and Ratification. Each reference to the Credit Agreement that is made in the Credit Agreement or any other Related Writing shall hereafter be construed as a reference to the Credit Agreement as amended hereby. Except as herein otherwise specifically provided, all terms and provisions of the Credit Agreement are confirmed and ratified and shall remain in full force and effect and be unaffected hereby. This Amendment is a Loan Document.
     12. Counterparts. This Amendment may be executed in any number of counterparts, by different parties hereto in separate counterparts and by facsimile signature, each of which, when so executed and delivered, shall be deemed to be an original and all of which taken together shall constitute but one and the same agreement.
     13. Headings. The headings, captions and arrangements used in this Amendment are for convenience only and shall not affect the interpretation of this Amendment.

6


 

     14. Severability. Any term or provision of this Amendment held by a court of competent jurisdiction to be invalid or unenforceable shall not impair or invalidate the remainder of this Amendment and the effect thereof shall be confined to the term or provision so held to be invalid or unenforceable.
     15. Governing Law. The rights and obligations of all parties hereto shall be governed by the laws of the State of New York, without regard to principles of conflicts of laws.
[Remainder of page intentionally left blank.]

7


 

     JURY TRIAL WAIVER. EACH PARTY HERETO HEREBY IRREVOCABLY WAIVES, TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, ANY RIGHT IT MAY HAVE TO A TRIAL BY JURY IN ANY LEGAL PROCEEDING DIRECTLY OR INDIRECTLY ARISING OUT OF OR RELATING TO THIS AGREEMENT OR ANY OTHER LOAN DOCUMENT OR THE TRANSACTIONS CONTEMPLATED HEREBY OR THEREBY (WHETHER BASED ON CONTRACT, TORT OR ANY OTHER THEORY). EACH PARTY HERETO (A) CERTIFIES THAT NO REPRESENTATIVE, AGENT OR ATTORNEY OF ANY OTHER PERSON HAS REPRESENTED, EXPRESSLY OR OTHERWISE, THAT SUCH OTHER PERSON WOULD NOT, IN THE EVENT OF LITIGATION, SEEK TO ENFORCE THE FOREGOING WAIVER AND (B) ACKNOWLEDGES THAT IT AND THE OTHER PARTIES HERETO HAVE BEEN INDUCED TO ENTER INTO THIS AGREEMENT AND THE OTHER LOAN DOCUMENTS BY, AMONG OTHER THINGS, THE MUTUAL WAIVERS AND CERTIFICATIONS IN THIS SECTION.
     IN WITNESS WHEREOF, the parties have executed and delivered this Amendment as of the date first set forth above.
         
  GIBRALTAR INDUSTRIES, INC.
 
 
  By:     
  Name:     
  Title:     
 
  GIBRALTAR STEEL CORPORATION OF
NEW YORK
 
 
  By:     
  Name:     
  Title:     
 
  KEYBANK NATIONAL ASSOCIATION,
as Agent and as a Lender
 
 
  By:     
  Name:     
  Title:     
 
  MANUFACTURERS AND TRADERS
TRUST COMPANY,
as a Co-Documentation Agent and a Lender
 
 
  By:     
  Name:     
  Title:     
Signature Page 1 of 3 to
Third Amendment Agreement

 


 

         
  JPMORGAN CHASE BANK, N.A.,
as a Co-Syndication Agent and a Lender
 
 
  By:     
  Name:     
  Title:     
 
  BMO CAPITAL MARKETS FINANCING, INC.,
as a Co-Syndication Agent and a Lender
 
 
  By:     
  Name:     
  Title:     
 
  HARRIS N.A.,
as a Fronting Lender
 
 
  By:     
  Name:     
  Title:     
 
  HSCB BANK USA, NATIONAL ASSOCIATION,
as a Co-Documentation Agent and a Lender
 
 
  By:     
  Name:     
  Title:     
 
  BANK OF AMERICA, N.A.,
as a Lender
 
 
  By:     
  Name:     
  Title:     
 
  PNC BANK, NATIONAL ASSOCIATION,
as successor to National City Bank,
as a Lender
 
 
  By:     
  Name:     
  Title:     
Signature Page 2 of 3 to
Third Amendment Agreement

 


 

         
  US BANK, NATIONAL ASSOCIATION,
as a Lender
 
 
  By:     
  Name:     
  Title:     
 
  RBS CITIZENS, NATIONAL ASSOCIATION,
as a Lender
 
 
  By:     
  Name:     
  Title:     
 
  FIRST NIAGARA BANK, N.A.,
as a Lender
 
 
  By:     
  Name:     
  Title:     
 
  COMERICA BANK,
as a Lender
 
 
  By:     
  Name:     
  Title:     
 
  PNC BANK, NATIONAL ASSOCIATION,
as a Lender
 
 
  By:     
  Name:     
  Title:     
 
Signature Page 3 of 3 to
Third Amendment Agreement

 


 

GUARANTOR ACKNOWLEDGMENT AND AGREEMENT
     The undersigned consent and agree to and acknowledge the terms of the foregoing Third Amendment Agreement, dated as of April 1, 2011. The undersigned further agree that the obligations of the undersigned pursuant to the Guaranty of Payment executed by the undersigned are hereby ratified and shall remain in full force and effect and be unaffected hereby.
     The undersigned hereby waive and release Agent and the Lenders and their respective directors, officers, employees, attorneys, affiliates and subsidiaries from any and all claims, offsets, defenses and counterclaims of any kind or nature, absolute and contingent, of which the undersigned are aware or should be aware, such waiver and release being with full knowledge and understanding of the circumstances and effect thereof and after having consulted legal counsel with respect thereto.
     JURY TRIAL WAIVER. THE UNDERSIGNED, TO THE EXTENT PERMITTED BY LAW, HEREBY WAIVE ANY RIGHT TO HAVE A JURY PARTICIPATE IN RESOLVING ANY DISPUTE, WHETHER SOUNDING IN CONTRACT, TORT OR OTHERWISE, AMONG BORROWERS, AGENT, THE LENDERS AND THE UNDERSIGNED, OR ANY THEREOF, ARISING OUT OF, IN CONNECTION WITH, RELATED TO, OR INCIDENTAL TO THE RELATIONSHIP ESTABLISHED AMONG THEM IN CONNECTION WITH THIS AMENDMENT OR ANY NOTE OR OTHER INSTRUMENT, DOCUMENT OR AGREEMENT EXECUTED OR DELIVERED IN CONNECTION HEREWITH OR THE TRANSACTIONS RELATED THERETO.
             
AIR VENT INC.   ALABAMA METAL INDUSTRIES CORPORATION
 
By:
      By:    
 
           
Name:
      Name:    
 
           
Title:
      Title:    
 
           
 
           
APPLETON SUPPLY CO., INC.   CONSTRUCTION METALS, LLC
 
By:
      By:    
 
           
Name:
      Name:    
 
           
Title:
      Title:    
 
           
 
           
DIAMOND PERFORATED METALS, INC.   DRAMEX INTERNATIONAL INC
 
By:
      By:    
 
           
Name:
      Name:    
 
           
Title:
      Title:    
 
           

 


 

             
FLORENCE CORPORATION   FLORENCE CORPORATION OF KANSAS
 
By:
      By:    
 
           
Name:
      Name:    
 
           
Title:
      Title:    
 
           
 
           
GIBRALTAR INTERNATIONAL, INC.   GIBRALTAR STRIP STEEL, INC.
 
By:
      By:    
 
           
Name:
      Name:    
 
           
Title:
      Title:    
 
           
 
           
NOLL/NORWESCO, LLC   SEA SAFE, INC.
 
By:
      By:    
 
           
Name:
      Name:    
 
           
Title:
      Title:    
 
           
 
           
SOLAR GROUP, INC.   SOLAR OF MICHIGAN, INC.
 
By:
      By:    
 
           
Name:
      Name:    
 
           
Title:
      Title:    
 
           
 
           
SOUTHEASTERN METALS MANUFACTURING COMPANY, INC.        
 
By:
           
 
           
Name:
           
 
           
Title:
           
 
           

 


 

SCHEDULE 2
GUARANTORS OF PAYMENT
Air Vent Inc., a Delaware corporation
Alabama Metal Industries Corporation, a Delaware corporation
AMICO Holding Company, Inc., a Delaware corporation
Appleton Supply Co., Inc., a Delaware corporation
Construction Metals, LLC, a California limited liability company
Diamond Perforated Metals, Inc., a California corporation
D.S.B. Holding Corp., a Delaware corporation
The D.S. Brown Company, an Ohio corporation
Florence Corporation, an Illinois corporation
Florence Corporation of Kansas, a Kansas corporation
Gibraltar Strip Steel, Inc., a Delaware corporation
Noll/Norwesco, LLC, a Delaware limited liability company
Sea Safe, Inc., a Louisiana corporation
Solar Group, Inc., a Delaware corporation
Solar of Michigan, Inc., a Delaware corporation
Southeastern Metals Manufacturing Company, Inc., a Florida corporation


 

SCHEDULE 3
BORROWING BASE COMPANIES
Air Vent, Inc.
Alabama Metal Industries Corporation
AMICO Holding Company, Inc.
Appleton Supply Company, Inc.
Construction Metals, LLC
Diamond Perforated Metals, Inc.
D.S.B. Holding Corp.
The D.S. Brown Company
Florence Corporation
Gibraltar Strip Steel, Inc.
Noll/Norwesco, LLC
Sea Safe, Inc.
Solar Group, Inc.
Southeastern Metals Manufacturing Company, Inc.


 

SCHEDULE 4
REAL PROPERTY
The following parcels of real property owned by the Borrowers and/or the Subsidiaries that are subject to a Deed of Trust as required pursuant to the terms of the Agreement:
(a)   3011 70th Avenue East, Fife Washington 98424
 
(b)   1320 Performance Drive, Stockton, California 95206
 
(c)   107 Fellowship Road, Taylorville, Mississippi 39168


 

SCHEDULE 5
PLEDGED SECURITIES
                                     
        Total            
        Shares/Equity   Ownership        
        Interests   Percentage   Certificate No.   % of Interest
Credit Party   Issuer   Outstanding   of the Pledgor   (if any)   Pledged
Gibraltar Steel Corporation of New York
  Air Vent Inc.     249       100 %     7       100 %
 
                                   
Gibraltar Steel Corporation of New York
  Solar of Michigan, Inc.     100       100 %     1       100 %
 
                                   
Gibraltar Steel Corporation of New York
  Southeastern Metals
Manufacturing
Company, Inc.
    252,021.7891       100 %     217       100 %
 
                                   
Gibraltar Steel Corporation of New York
  Gibraltar Strip Steel, Inc.   5 shares of Class A     100 %     21       100 %
 
                                   
 
      5 shares of Class B             22          
 
                                   
Gibraltar Steel Corporation of New York
  GSC Flight Services Corp.   100 shares     100 %     1       100 %
 
                                   
Gibraltar Industries, Inc.
  Appleton Supply Co., Inc.     1,000       100 %     1       100 %
 
                                   
Gibraltar Industries, Inc.
  Florence Corporation     2,440       100 %     182       100 %
 
                                   
Gibraltar Industries, Inc.
  Gibraltar Steel Corporation of New York     101       100 %     C-24       100 %
 
                                   
Gibraltar Industries, Inc.
  Solar Group, Inc.     1,000       100 %     1       100 %

 


 

                                     
        Total            
        Shares/Equity   Ownership        
        Interests   Percentage   Certificate No.   % of Interest
Credit Party   Issuer   Outstanding   of the Pledgor   (if any)   Pledged
Gibraltar Industries, Inc.
  Gibraltar Industries
Germany GmbH**
  25,000       100 %   None     *  
 
                                   
Gibraltar Industries, Inc.
  Gibraltar Industries
(UK) Limited**
  1 Ordinary Share     100 %     2       *  
 
                                   
Gibraltar Industries, Inc.
  AMICO Holding Company, Inc.     500       100 %     1       100 %
 
                                   
Gibraltar Industries, Inc.
  D.S. B. Holding Corp.   66,749.90 Common     100 %     10       100 %
 
                                   
    65,750.10 Preferred           P-10        
 
                                   
D.S. B. Holding Corp.
  The D.S. Brown Company     1,000       100 %     1       100 %
 
                                   
AMICO Holding Company, Inc.
  Alabama Metal
Industries
Corporation
    110       100 %   28 and 29     100 %
 
                                   
Member: Southeastern Metals Manufacturing Company, Inc.
  Construction
Metals, LLC
    100 %     100 %   None     100 %
 
                                   
Member: Southeastern Metals Manufacturing Company, Inc.
  Noll/Norwesco, LLC     100 %     100 %     1       100 %
 
                                   
Alabama Metal
Industries
Corporation
  Diamond Perforated Metals, Inc.     1,000,000       100 %     7       100 %
 
                                   
Alabama Metal
Industries
Corporation
  Sea Safe, Inc.   15,008 Common Stock     100 %     56       100 %

 


 

                                     
        Total            
        Shares/Equity   Ownership        
        Interests   Percentage   Certificate No.   % of Interest
Credit Party   Issuer   Outstanding   of the Pledgor   (if any)   Pledged
Alabama Metal
Industries
Corporation
  AMICO Canada, Inc.**     1,750,000       100 %     C-1       *  
 
                                   
Florence Corporation
  Florence Corporation of Kansas     2,490       100 %     1       100 %
 
*   100% of non-voting shares and equity interests and 65% of voting shares or equity interest constitute Pledged Securities
 
**   Foreign Subsidiaries

 


 

SCHEDULE 6.1
CORPORATE EXISTENCE; SUBSIDIARIES; FOREIGN QUALIFICATIONS
1. The following list identifies the jurisdiction of organization/formation and each jurisdiction in which any Company is qualified to do business:
         
    Jurisdiction of   Jurisdictions
    Organization/   Where Entity is Qualified
Company   Formation   to Do Business
Air Vent Inc.
  Delaware   Illinois
Iowa
Massachusetts
Mississippi
Missouri
North Carolina
Texas
 
Alabama Metal Industries Corporation
  Delaware   Alabama
California
Colorado
Florida
Illinois
Louisiana
Mississippi
Missouri
Ohio
South Carolina
Texas
Utah
Washington
 
AMICO Holding Company, Inc.
  Delaware   None
 
Appleton Supply Co., Inc.
  Delaware   Michigan
Wisconsin

 


 

         
    Jurisdiction of   Jurisdictions
    Organization/   Where Entity is Qualified
Company   Formation   to Do Business
Construction Metals, LLC
  California   Arizona
Colorado
Utah
Washington
 
Diamond Perforated Metals, Inc.
  California   None
 
D.S.B. Holding Corp.
  Delaware   None
 
The D.S. Brown Company
  Ohio   California
Georgia
Michigan
Minnesota
New Jersey
Ohio
Pennsylvania
Texas
 
Florence Corporation
  Illinois   None
 
Florence Corporation of Kansas
  Kansas   Utah
 
Gibraltar Industries, Inc.
  Delaware   New York
 
Gibraltar Steel Corporation of New York
  New York   Georgia
Michigan
Ohio
Texas
 
Gibraltar Strip Steel, Inc.*
  Delaware   New York
Ohio
Texas***

 


 

         
    Jurisdiction of   Jurisdictions
    Organization/   Where Entity is Qualified
Company   Formation   to Do Business
Noll/Norwesco, LLC
  Delaware   California
Georgia
Oregon
Washington
Utah
 
Sea Safe, Inc.
  Louisiana   Illinois
Texas
 
Solar Group, Inc.
  Delaware   Mississippi
Texas
North Carolina
 
Solar of Michigan, Inc.
  Delaware   Michigan
 
Southeastern Metals Manufacturing Company, Inc.
  Florida   New Mexico
Texas
 
GSC Flight Services Corp.*
  New York   None
 
Gibraltar Industries Germany GmbH**
  Germany   None
 
Gibraltar Industries (UK) Limited**
  United Kingdom   None
 
AMICO Canada, Inc.**
  Canada   British Columbia
Ontario
Quebec
 
Dramex Expanded Metal Limited**
  United Kingdom   None
 
Expamet Polska sp.zo.o**
  Poland   None
 
Sorst Streckmetall GmbH**
  Germany   None
 
The Expanded Metal Company Limited**
  United Kingdom   None

 


 

2. The following Subsidiaries are wholly-owned directly by Gibraltar Steel Corporation of New York which, in turn, is wholly-owned by Gibraltar Industries, Inc.:
Air Vent Inc.
Gibraltar Strip Steel, Inc.*
GSC Flight Services Corp.*
Solar of Michigan, Inc.*
Southeastern Metals Manufacturing Company, Inc.
3. The following Subsidiaries are directly and wholly-owned by Gibraltar Industries, Inc.
Gibraltar Steel Corporation of New York
AMICO Holding Company, Inc.
Appleton Supply Co., Inc.
Gibraltar Industries Germany GmbH**
Gibraltar Industries (UK) Limited**
D.S.B. Holding Corp.
Florence Corporation
Solar Group, Inc.
4. The following Subsidiaries are wholly-owned directly by Alabama Metal Industries Corporation which, in turn, is wholly-owned by AMICO Holding Company, Inc., which is wholly owned by Gibraltar Industries, Inc.:
AMICO Canada, Inc.**
Diamond Perforated Metals, Inc.
Sea Safe, Inc.
5. The remainder of the Subsidiaries are owned as follows:
         
        Indirect
Subsidiary   Direct Ownership   Ownership
Alabama Metal Industries Corporation
  AMICO Holding Company, Inc. — 100%   GII — 100%
Construction Metals LLC
  Southeastern Metals Manufacturing Company, Inc. — 100%   GSCNY — 100%
The D.S. Brown Company
  D.S.B. Holding Corp.   GII — 100%
Dramex Expanded Metal Limited**
  Gibraltar Industries (UK) Limited** — 100%   GII — 100%
Expamet Polska sp.zo.o**
  The Expanded Metal Company Limited** — 100%   GII — 100%
Florence Corporation of Kansas
  Florence Corporation — 100%   GII — 100%

 


 

         
        Indirect
Subsidiary   Direct Ownership   Ownership
Noll/Norwesco, LLC
  Southeastern Metals Manufacturing Company, Inc. — 100%   GSCNY — 100%
Sorst Streckmetall GmbH**
  Gibraltar Industries Germany GmbH** — 100%   GII — 100%
The Expanded Metal Company Limited**
  Gibraltar Industries (UK) Limited** — 100%   GII — 100%
 
*   Non-Material Subsidiaries
 
**   Foreign Subsidiaries
 
***   Borrower or Subsidiary Guarantor, as applicable, is currently in the process of withdrawing its qualification to do business in this State.
 
    GSCNY= Gibraltar Steel Corporation of New York
 
    GII = Gibraltar Industries, Inc.
6. The principal place of business and the chief executive office for the Borrowers, each Subsidiary Guarantor and each Foreign Subsidiary is 3556 Lake Shore Road Buffalo, New York 14219.

 


 

SCHEDULE 6.9
LOCATIONS
1.   See attached list for locations currently leased and/or owned by a Credit Party, where inventory is currently located.
 
2.   The following list provides for third-party locations where inventory is currently held:
             
            Description of
            Assets and Nature of
Credit Party   Name of Third Party   Address   Relationship
Air Vent, Inc.
  Reliable Consolidation   415 N Blooming Street
Lowel, AR 72745
  Inventory warehouse*
 
           
Air Vent, Inc.
  Environmental Friendly   1833 N I-35E
Dallas, Texas 75006
  Outside processor*
 
           
Air Vent, Inc.
  Pellams Warehouse   917 Parkway
Grand Prairie, TX 75051
  Inventory warehouse*
 
           
Air Vent, Inc.
  Custom Mfg. Co.   5501 S Lamar
Dallas, TX 75215
  Outside processor*
 
           
Solar Group, Inc
  Boswell Retardation Center   P.O. Box 128
Magge, MS 39111
  Outside processor*
 
           
Solar Group, Inc
  Pine Belt Industries   5370 Highway 42
Hattiesburg, MS 39401
  Outside processor*
 
           
Solar Group, Inc
  Pro Pak   2010 South Great Southwest
Parkway
Grand Prairie, Texas 75051.
  Outside processor*
 
           
Florence Corporation
  Van Am Tool & Engineering   5025 Easion Road
St. Joseph, MO 64507
  Outside processor*
 
           
Florence Corporation
  Bennet Packaging   220 N.W Space Center Rd
Lee’s Summit, MO 64064
  Outside processor*
 
           
Florence Corporation
  Stemar Industries   116 Kean Street
W Bablyon, NY 11704
  Outside processor*
 
           
Florence Corporation
  A&E Custom Manufacturing   3150 Chrysler Road
Kansas City, KS 66115
  Outside processor*
 
           
Florence Corporation
  BMS Logistics   3601 S Leonard Rd
St. Joseph, MO 64503
  Outside processor*

 


 

             
            Description of
            Assets and Nature of
Credit Party   Name of Third Party   Address   Relationship
Southeastern Metals Manufacturing Company, Inc.
  Coilplus-Texas   6610 Railway
San Antonio, Texas 78244
  Outside processor
 
           
(under the assumed name DOT Metal Products, Inc.)
           
 
           
Southeastern Metals Manufacturing Company, Inc.
  PreCoat   16402 Jacinto Port Blvd
Houston, TX 77015
  Outside processor*
 
           
(under the assumed name DOT Metal Products, Inc.)
           
 
           
Southeastern Metals Manufacturing Company, Inc.
  Curtis Steel   6504 Hurst
Houston, TX 77088
  Outside processor*
 
           
(under the assumed name DOT Metal Products, Inc.)
           
 
           
Appleton Supply Company, Inc
  Wismarq   11440 W. Addison Ave
Franklin Park, IL 60131
  Outside processor*
 
           
Southeastern Metals Manufacturing Company, Inc.
  Toll/Pride   13518 NE 258th Street
Rayford, FL 32083
  Outside processor*
 
           
Southeastern Metals Manufacturing Company, Inc.
  PreCoat   3399 Davey Allison Blvd
Hueytown, AL 35023
  Outside processor*

 


 

             
            Description of
            Assets and Nature of
Credit Party   Name of Third Party   Address   Relationship
Southeastern Metals Manufacturing Company, Inc.
  Lomb   250 Louisville Road
Savannah, Georgia 31322
  Outside processor*
 
           
Southeastern Metals Manufacturing Company, Inc.
  Magic Steel   408 Mareo St. NW
Decatur, FL 35603
  Outside processor*
 
           
Southeastern Metals Manufacturing Company, Inc.
  JIT   216 E. Lathop Avenue
Savannah, Georgia 31402
  Outside processor*
 
           
Alabama Metal Industries Corporation
  Marleau Hercules   4333 N. Detroit Ave
Toledo, OH 43612
  Outside processor*
 
           
Alabama Metal Industries Corporation
  Metalplate Galvanizing   1120 39th Street
Birmingham, AL 35234
  Outside processor*
 
           
Alabama Metal Industries Corporation
  Ferraloy   1425 Red Hat Rd
Decatur, AL 35601
  Outside processor*
 
           
Alabama Metal Industries Corporation
  B.L. Downey   2125 Gardner Rd
Broadview, IL 60155
  Outside processor*
 
           
Alabama Metal Industries Corporation
  Ferraloy   1435 Red Hat Rd
Decatur, AL 35601
  Outside processor*
 
           
Alabama Metal Industries Corporation
  AAA Galvanizing   625 Mills Rd
Joilet, IL 60434
  Outside processor*
 
           
Alabama Metal Industries Corporation
  Metalplate
Galvanizing-Deyton
  10635 Needham Street
Houston, TX 77013
  Outside processor*
 
           
Alabama Metal Industries Corporation
  Marantha Machine   128 W. Fm 6
Nevada, TX 75173
  Outside processor*

 


 

             
            Description of
            Assets and Nature of
Credit Party   Name of Third Party   Address   Relationship
Alabama Metal Industries Corporation
  Hobson Galvanizing   2402 Engineering Rd
Belle Chase, LA 70037
  Outside processor*
 
           
Alabama Metal Industries Corporation
  Aztec Galvanizing   P.O. Box 64
Crowley, Texas 76036
  Outside processor*
 
           
Alabama Metal Industries Corporation
  Vas Delaware Galvanizing   511 Carrol Drive
New Castle Delaware 19720
  Outside processor*
 
           
Diamond Perforated Metals, Inc.
  Drexel Supply Co.   10361 E 106 Ave
Henderson, CO 80601
  Public warehouse*
 
*   An immaterial amount of collateral is maintained at this location. If required by Agent, a Processor Waiver, in form and substance acceptable to Agent, will be delivered for this location.
3. Each Credit Party’s chief executive office is located at 3556 Lake Shore Road Buffalo, New York 14219.

 


 

SCHEDULE 6.9
Gibraltar Strip Steel Locations
                         
Business Unit   Physical Address   City   State   ZIP Code        
Gibraltar Strip Steel
  2555 and 2545 Walden Ave.   Buffalo   New York   14225   Owned    
Storage & Ventilation Locations
                         
Business Unit   Physical Address   City   State   ZIP Code        
Air Vent
  7700 Harker Drive Suite A   Peoria   Illinois   61615   Leased  *  
Air Vent
  418 N. Front Street   Orrick   Missouri   64077   Owned    
Air Vent
  1710 South 21st Street   Clinton   Iowa   52732   Owned    
Air Vent
  4117 Pinnacle Point Dr.   Dallas   Texas   75211   Leased  *  
 
                       
SOLAR
  107 Fellowship Road   Taylorsville   Mississippi   39168   Owned    
SOLAR
  203 Fellowship Road   Taylorsville   Mississippi   39168   Owned    
Engineered Products Locations
                         
Business Unit   Physical Address   City   State   ZIP Code        
Florence
  5935 Corporate Drive   Manhattan   Kansas   66503   (IRB Bond)    
Florence
  2321 N. Jackson   Junction City   Kansas   66441   Leased  *  
AMICO Locations
                         
Business Unit   Physical Address   City   State   ZIP Code        
AMICO
  3240 & 3245 Fayette Avenue   Birmingham   Alabama   35208   Owned    
AMICO
  11093 Beach Avenue   Fontana   California   92335   Owned    
AMICO
  7300 W. Sunnyview Avenue   Visalia   California   93291   Owned    
AMICO
  913-915 S. Heald Street   Wilmington   Delaware   19806   Leased  *  
AMICO
  1033 Pine Chase Avenue   Lakeland   Florida   33801   Owned    
AMICO
  1115 E. 5000 North Road   Bourbonnais   Illinois   60914   Leased  *  
AMICO
  209 Glaser Drive   Lafayette   Louisiana   70508   Owned    
AMICO
  1427 Howell Street   North Kansas City   Missouri   64068   Leased  *  
AMICO
  8110 Southern Boulevard   Youngstown   Ohio   44512   Owned    
AMICO
  1520 Roper Mountain Road   Greenville   South Carolina   29615   Leased  *  
AMICO
  825 County Road 606   Dayton   Texas   77535   Owned    
AMICO
  120 North Latham   Houston   Texas   77011   Leased  *  
AMICO
  212 North 1330 West Street   Orem   Utah   84059   Owned    
AMICO
  22153 West Valley Highway   Kent   Washington   98032   Leased  *  
Noll Group Locations
                         
Business Unit   Physical Address   City   State   ZIP Code        
CMI
  13169-B Slover Avenue   Fontana   California   92337   Leased  *  
CMI
  3011 70th Avenue E.   Fife   Washington   98424   Owned    
CMI
  1320 Performance Drive   Stockton   California   95206   Owned    

1


 

SCHEDULE 6.9
                         
Business Unit   Physical Address   City   State   ZIP Code        
CMI
  985 West 3160 South   Salt Lake City   Utah   84123   Leased  *  
 
  Central Valley Industrial Park                    
CMI
  4900 Moline Street   Denver   Colorado   80239   Leased from K & W  **  
 
                  Metal Fabricators, LLC    
 
Noll/Norwesco
  3011 70th Avenue E.   Fife   Washington   98424   Owned    
Noll/Norwesco
  1320 Performance Drive   Stockton   California   95206   Owned    
Noll/Norwesco
  38 SE 97th Avenue   Portland   Oregon   97216   Owned    
 
                       
K & W
  13169-B Slover Avenue   Fontana   California   92337   Leased  **  
K & W (lease is in
  4850 Moline Street   Denver   Colorado   80239   Leased  *  
the name of Gibraltar
Industries, Inc.)
                       
 
                       
Appleton
  1905 West Haskell Street   Appleton   Wisconsin   54914   Owned    
Appleton
  927 South Grider Street   Appleton   Wisconsin   54914   Owned    
 
                       
SEMCO
  11801 Industry Drive   Jacksonville   Florida   32218   Leased  *  
 
                       
SEMCO
  3004 - B Aldine Bender, RR 1   Houston   Texas   77032   Leased  *  
SEMCO
  18757 Bracken Drive   San Antonio   Texas   78266   Leased  ***  
Brown Locations
                         
Business Unit   Physical Address   City   State   ZIP Code        
The D.S. Brown Company
  300 East Cherry Street   North Baltimore   Ohio   45872   Owned    
 
*   A Landlord’s Waiver has been delivered
 
**   Location shared with another Credit Party; Landlord’s Waiver has been delivered by the Credit Party on the lease
 
***   There are two leases for this location and a Landlord’s Waiver has been delivered from each landlord

2


 

SCHEDULE 6.17
INTELLECTUAL PROPERTY
1 See attached list of Copyrights
2 See attached list of Trademarks
3 See attached list of Patents

 


 

                 
Copyright Claimant   Reg. #   Date Reg.   Title   Description
Air Vent Inc.
  TX 131-073   7/24/1978   Principles of Attic Ventilation   24 pgs
 
               
Solar Group, Inc.
  TX 5-186-529   4/30/2000   Olde Towne Collection   2 pgs
 
               
Solar Group, Inc.
  TXU 976-824   11/27/2000   Premium Mailbox Post: The Estate ES200 Black   poster
 
               
Solar Group, Inc.
  TXU 977-296   11/27/2000   Premium Mailbox Post: The Estate Series ES200 White   poster
 
               
Solar Group, Inc.
  TXU 980-800   12/4/2000   Premium Mailbox: Estate Series E15 Premium Aluminum Mailbox Post   poster
 
               
Solar Group, Inc.
  TXU 980-912   11/27/2000   Premium Mailbox: Estate Series E15 Black   poster
 
               
Solar Group, Inc.
  TXU 983-179   11/28/2000   Premium Mailbox (Estate Series E15 White)   poster
 
               
Solar Group, Inc.
  V3412D855   3/13/1998   Centrury Classic 2000 Mailbox & 1 Other Title (Century Classic 2000 3-D artwork)   n/a
 
               
Solar Group, Inc.
  VA 1-038-133   3/27/2000   Olde Towne Collection Post Assembly   mailbox support post
 
               
Solar Group, Inc.
  VA 1-041-820   3/27/2000   Olde Towne Collection Vertical Mailbox   n/a
 
               
Solar Group, Inc.
  VA 1-041-830   3/27/2000   Olde Towne Collection Horizontal Mailbox   n/a
 
               
Solar Group, Inc.
  VAU 462-933   5/28/1999   Cast Aluminum Horizontal Citibox   technical drawing
 
               
Solar Group, Inc.
  VAU 469-000   5/14/1999   Cast Aluminum Vertical Citibox   technical drawing

 


 

Air Vent Inc.
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
AV (stylized)
    Registered   12/8/1981     1,180,817     73/258,601   USA   IC 006   Metal roof ventilators
 
                                   
FILTERVENT
  FILTERVENT   Registered   6/5/1990     1,599,621     73/838,041   USA   IC 019   Unitary fabricated roof ridge
ventilators without moving parts
 
                                   
FILTERVENT
  FILTERVENT   Registered   12/4/2007     3,348,074     78/549,016   USA   IC 019   Non-metallic unitary fabricated roof ridge
ventilators without
moving parts
 
                                   
PEAKPERFORMER
(and design)
    Registered   4/24/2007     3,234,789     78/617,180   USA   IC 019   Non-mechanical plastic roof
ridge vent for ventilating
attics
 
                                   
SHINGLEVENT
  SHINGLEVENT   Registered   6/18/1991     1,648,162     73/834,918   USA   IC 019   Unitary fabricated roof ridge ventilators without moving parts and installation parts sold as a unit
 
                                   
SOLAR TEK (and design)
    Registered   3/24/1987     1,433,735     73/607,334   USA   IC 011   Automatic foundation ventilator
 
                                   
SOLARCOOL (and design)
    Registered   11/1/2005     3,011,981     78/242,018   USA   IC 006   Solar powered roof and attic vent
 
                                   
TEMP-VENT (and design)
    Registered   1/27/1976     1,031,384     73/049,505   USA   IC 011   Automatic foundation ventilators

 


 

Air Vent Inc.
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
THE EDGE
  THE EDGE   Registered   11/11/2008     3,531,951     77/239,648   USA   IC 019   Plastic attic roof intake vents
for ventilation purposes
 
                                   
VENTURIVENT
  VENTURIVENT   Registered   7/3/1990     1,604,349     73/835,541   USA   IC 006   Unitary fabricated roof rigdge ventilators without moving parts made primarily of metal

 


 

Alabama Metal Industries Corporation
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
AMICO
  AMICO   Registered   9/5/1995     1,915,974     74/532,835   USA   IC 006
IC 019
  Structural and ornamental metal grating; metal laths, metal lathing accessories, namely expansion joints, control joints, corner beads, casing beads, and cold rolled channels for drywall studs and runner track; metal enclosure systems comprising expanded metal panels posts, doors and hardware for their installation; metal fencing systems comprising expanded metal fence sections, posts, fittings, rails and gates; and expanded metal forms
 
                                   
AMICO (and design)
    Registered   8/22/1995     1,912,984     74/532,836   USA   IC 006
IC 019
  Structural and ornamental metal grating; metal laths and metal lathing accessories, namely expansion joints, control joints, corner beads, casing beads and cold rolled metal channels for drywall studs and runner tracks; metal enclosure systems comprising expanded metal panels, posts, doors and hardware for their installation; metal fencing systems comprising expanded metal fence sections, posts, fittings, rails and gates; and expanded metal forms
 
                                   
ANC
  ANC   Registered   12/11/2007     3,351,722     77/143,724   USA   IC 019   Non-metal fencing and accessories therefor, namely, panels, posts, fittings and fasteners
 
                                   
DIAMOND GRIP
  DIAMOND GRIP   Registered   9/15/1998     2,189,215     75/318,925   USA   IC 006   Metal industrial safety grating
 
                                   
GMS GENESIS
(and design)
    Registered   2/25/1997     2,063,254     75/119,091   USA   IC 006   Raised metal access flooring
 
                                   
ORNAMESH
  ORNAMESH   Registered   6/27/1995     1,901,456     74/532,516   USA   IC 006   Ornamental metal gratings
 
                                   
SAFETY GRIP
  SAFETY GRIP   Registered   4/4/2000     2,337,053     75/330,898   USA   IC 006   Metal flooring
 
                                   
SECURA FENCE
SYSTEM
  SECURA FENCE SYSTEM   Registered   7/11/1995     1,904,092     74/533,654   USA   IC 006   Metal fencing system consisting of expanded metal fence sections, posts, fittings, rails and gates
 
                                   
SECURA LATH
  SECURA LATH   Registered   9/26/1995     1,921,479     74/575,870   USA   IC 006   Metal lathing

 


 

Alabama Metal Industries Corporation
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
SECURA MESH
  SECURA MESH   Registered   7/11/1995     1,904,088     74/532,515   USA   IC 006   Metal partitions and enclosure systems of expanded metal comprising expanded metal sections, posts, doors and hardware
 
                                   
SHOT-FORM
  SHOT-FORM   Registered   5/20/2003     2,717,837     76/167,444   USA   IC 006   Metal casting forms for concrete
 
                                   
STAY-FORM
  STAY-FORM   Registered   6/20/1995     1,900,341     74/532,517   USA   IC 006   Expanded metal concrete forms
 
                                   
ZIP STRIP
  ZIP STRIP   Registered   8/8/1995     1,910,087     74/532,798   USA   IC 019   Vinyl trim stop for drywall, stucco and veneer applications
 
                                   
GATOR-GRATE
(and design)
    Registered   2/12/1985     1,319,387     73/445,594   USA   IC 019   Fiber and resin molded trays, gratings and structural shapes for use in industrial and commercial applications, all sold as a unit; custom manufacture of fiber and resin molded trays, gratings and structural shapes for use in industrial and commercial applications
 
                                   
KORDEK
  KORDEK   Registered   7/24/1979     1,122,786     73/169,918   USA   IC 019   Fiberglass reinforced molded resin walking and catwalk grating

 


 

Appleton Supply Company, Inc.
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
APPLETON BUILDING PRODUCTS
(and design)
    Registered   7/24/2007     3,270,024     78/745,852   USA   IC 006   Metal building products; namely, flashings, roof edgings, wind braces, gravel stops, ridge rolls, gutter aprons, hardboard siding corners, brick molding covers, H molding joint covers, J channel, roll aluminum and roll steel, brick bonds, flashing shingles, starter strips, drywall corner beads, soffit panels, soffit trim and fascia
 
                                   
AS (and design)
    Registered   12/29/1992     1,759,443     74/230,736   USA   IC 006   Metal building products; namely, flashings, roof edgings, wind braces, gravel stops, ridge rolls, gutter aprons, hardboard siding corners, brick molding covers, H molding joint covers, roll aluminum and roll steel, brick bonds, flashing shingles, starter strips and drywall corner beads
 
                                   
SELL-EVEN BUILDING
PRODUCTS
  SELL-EVEN BUILDING PRODUCTS   Registered   10/6/1992     1,721,382     74/230,245   USA   IC 006   Metal building products; namely, soffits, siding, gutters and coiled aluminum sold in bulk
 
                                   
SELL-EVEN BUILDING PRODUCTS
(and design)
    Registered   10/6/1992     1,721,386     74/230,951   USA   IC 006   Metal building products; namely, soffits, siding, gutters and coiled aluminum sold in bulk

 


 

The D.S. Brown Company, Inc.
Trademarks
                                         
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
DELCRETE
  DELCRETE   Registered   1/3/1989     1,518,915       73733176     USA   IC 019   Elastomeric concrete for construction of pavement joints.
 
                                       
DELCRETE
  DELECREETE   Registered   2/11/1993     440,290       n/a     Mexico   IC 019   Concreto Elastomerico para de uniones de pavimento
 
                                       
STEELFLEX
  STEELFLEX   Registered   5/20/1997     2,062,964       75082004     USA   IC 006   Strip seal expansion joint systems composed of steel profiles, reinforcing steel, steel anchors and neoprene glands, sold as a unit.
 
                                       
DELASTIC
  DELASTIC   Registered   10/14/1997     2,104,782       75/082,079     USA   IC 017   Preformed elastomeric compression sealing strips for concrete pavement.
 
                                       
EXODERMIC
  EXODERMIC   Registered   8/5/2003     2,747,531       75/642,180     USA   IC 42   CONSULTATION AND PROVIDING INFORMATION RELATED TO COMPOSITE BRIDGE DECKS COMPRISED OF UNFILLED GRID AND STRUCTURAL SLAB.
 
                                       
EXODERMIC
  EXODERMIC   Registered   8/31/2004     2,879,486       78/281,391     USA   IC 019   composite bridge decks comprised of unfilled grids and structural slabs, composed primarily of concrete and other non-metal compositions.
 
                                       
DELASTIC-LS
    Registered   7/13/2010     3,816,291       77/657,458     USA   IC 017   Two-part urethane sealant and primer, sold together as a unit, for use on engineered joints on bridges and roads.

 


 

The D.S. Brown Company, Inc.
Trademarks
                                         
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
TRANSPATCH
    Pending   n/a     n/a       77/581,316     USA   IC 019   Concrete and asphalt pavement repair material, namely, tar-based concrete and asphalt patching compound.
 
                                       
MATRIX PREMIX
    Pending   n/a     n/a       77/696,995     USA   IC 019   Pre-packaged bridge expansion joint filler.

 


 

Gibraltar Industries, Inc.
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
WEATHER-VENT
  WEATHER-VENT   Registered   5/31/2005     2,956,738     76/581,717   USA   IC 006   Metal vents to be used on roofs


 

Noll/Norwesco, LLC
Trademarks
                                         
                Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
025
    025     Registered   9/19/1961     0,721,610     72/097,234   USA   IC 011   Cap assemblies for gas vents
 
                                       
GENERAL METALCRAFT
PRODUCTS
(and design)
    Registered   1/11/2000     2,307,147     75/502,001   USA   IC 006   Metal building products, namely, gutters, downspouts, flashings, roof vents, and HVAC ducting
 
                                       
M&N PLASTICS
  M&N PLASTICS   Registered   12/26/2006     3,188,869     78/652,448   USA   IC 019   Fabricated plastic products, namely area wells for building ventilation, vents for buildings, namely cap vents, foundation vents, gable vents, ridge vents, roof vents, soffit vents, and stem vents.
 
                                       
NOLL
  NOLL   Registered   9/19/1961     0,721,611     72/097,235   USA   IC 011   Cap assemblies for gas vents
 
                                       
NORWESCO
  NORWESCO   Registered   10/5/1965     0,796,980     72/202,117   USA   IC 021   Fabricated metal products, namely, pails, tubs, garbage cans, mailboxes, and sprinkling cans.
 
                                       
NORWESCO
  NORWESCO   Registered   9/7/1965     0,795,437     72/202,118   USA   IC 006
IC 017
IC 019
  Fabricated metal products namely, downspouts, gutters, roof ventilators, shower stalls, and window wells.
 
                                       
NORWESCO
  NORWESCO   Registered   9/7/1965     0,795,498     72/202,119   USA   IC 012   Wheelbarrows


 

Noll/Norwesco, LLC
Trademarks
                                         
                Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
NORWESCO
  NORWESCO   Registered   11/28/2006     3,176,210     78/616,966   USA   IC 006
IC 012
IC 019
IC 021
  Fabricated metal products, namely, mail boxes, downspouts, gutters, roof vents for ventilation, window wells, metal HVAC pipe and ducts, namely pipes, ducts, adjustable angles, boots, boxes, caps, collars, elbows, filter slides, increasers, plugs, reducers, saddles, spin-ins, stands, tees, and wyes for HVAC ducts; Wheelbarrows; Fabricated plastic products, namely, area wells for building ventilation, vents for buildings, namely, cap vents, foundation vents, gable vents, ridge vents, roof vents, soffit vents, and stem vents; Fabricated metal products, namely, pails, water tubs, garbage cans, and watering cans.
 
                                       
VENT AIR
  VENT AIR   Registered   12/5/2006     3,179,511     78/617,039   USA   IC 019
IC 020
  Fabricated plastic products for use in household construction, namely, cap vent covers, foundation vent covers, gable vent covers, ridge vent covers, roof vent covers, soffit vent covers, and stem vent covers for roof, wall, and building foundations; Fabricated plastic products for use in household construction, namely, non-metal ventilating ducts utilizing end cap vents, foundation vents, gable vents, ridge vents, roof vents, soffit vents, and stem vents.


 

Sea Safe, Inc.
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
SEASAFE (and design)
    Registered   4/3/2001     2,439,864     75/562,870   USA   IC 019   Fiber and resin molded trays, gratings and structural shapes for use in industrial and commercial applications, all sold as a unit; custom manufacture of fiber and resin molded trays, gratings and structural shapes for use in industrial and commercial applications


 

Solar Group, Inc.
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
AIRHAWK
  AIRHAWK   Registered   4/11/1995     1,889,235     74/447,442   USA   IC 011   Roof ventilators, louver-type ventilators, foundation vents and roof and attic fans for residential and commercial use
 
                                   
ARTCRAFT
  ARTCRAFT   Registered   6/6/2006     3,100,404     78/593,252   USA   IC 006   Mailboxes, mailbox support posts and bases, newspaper boxes, and decorative finials, post caps, and mounting brackets for the above, all made primarily of metal; street signs, street sign support posts, street sign brackets, all made primarily of metal
 
                                   
COUNTRY IMAGE
(stylized)
    Registered   4/4/1989     1,532,660     73/752,200   USA   IC 006   Decorated metal rural boxes
 
                                   
EASY UP (and design)
      Registered   10/8/1996     2,006,214     75/013,693   USA   IC 006
IC 011
IC 020
  Metal goods, namely drive-in post anchors, T-bracing and flat wall bracing, door viewers and knockers, door finger pulls, door stops, handrail brackets, cabinet catches, metal closet rods, sash locks, sash lifts, closet hinges, metal rod chairs for supporting reinforcing bars used in concrete construction, soffit ventilators, house numbers, metal mailboxes, mailbox post mounts, mailbox post supports, mail slots, mailbox mounting hardware, namely metal mounting brackets, screws and bolts; metal static roof vents, metal ridge vents, metal ventilating lovers, soffit strips, foundation vents; Turbine ventilators and powered ventilators for domestic use; Non-metal mailboxes, non-metal mailbox house mounts, non-metal house numbers, non-metal house number supports, non-metal mailbox flags, non-metal wall bumpers, non-metal roof vents, non-metal ridge vents, non-metal storage hooks
 
                                   
HANG STUFF
(and design)
    Registered   9/9/1980     1,139,387     73/205,314   USA   IC 006   Wall mounted adjustable tool holders made of metal


 

Solar Group, Inc.
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
MAILSAFE (and
design)
    Registered   7/2/1996     1,984,693     74/595,017   USA   IC 020   Non-metal mail boxes
 
                                   
PARCEL PRO
  PARCEL PRO   Registered   2/4/2003     2,684,473     76/214,467   USA   IC 006
IC 020
IC 021
  Metallic lockable containers for the receipt of delivered packages, envelopes, and other articles; lockable containers primarily of plastic for commercial use, namely, for the receipt of delivered packages, envelopes, and other articles; lockable containers primarily of plastic for household use, namely, for the receipt of delivered packages, envelopes and other articles
 
                                   
POST L POST
  POST L POST   Registered   7/15/1969     0,872,869     72/310,288   USA   IC 006   Metal posts for mounting rural mail boxes
 
                                   
SIMPL STORAGE
  SIMPL STORAGE   Registered   3/13/2007     3,219,028     78/555,053   USA   IC 020   Plastic shelving systems comprised of plastic shelves, plastic columns, plastic drawers, plastic closet rods, plastic uprights, plastic closet shelving
 
                                   
THE BRUTE (stylized)
    Registered   5/30/1989     1,541,576     73/747,770   USA   IC 020   Non-metal rural mailboxes
 
                                   
THE ESTATE SERIES
  THE ESTATE SERIES   Registered   11/19/2002     2,652,518     76/167,826   USA   IC 006   Rural metal mailboxes, metal posts for supporting mailboxes, metal fasteners for securing post components to each other


 

Solar Group, Inc.
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
THE GENTRY
  THE GENTRY   Registered   2/10/2004     2,812,677     76/498,613   USA   IC 020   Plastic rural mailboxes and plastic posts for rural mailboxes
 
                                   
THE ULTIMATE
RIDGE VENT
  THE ULTIMATE
RIDGE VENT
  Registered   7/9/2002     2,591,184     76/235,253   USA   IC 019   Non-metallic building materials, namely roofing ridge vents and vent strips
 
                                   
THE ULTIMATE
ROLLED RIDGE VENT
  THE ULTIMATE
ROLLED RIDGE VENT
  Registered   6/17/2003     2,728,306     76/242,890   USA   IC 019   Non-metallic building materials, namely ridge vents and vent strips
 
                                   
ESTATE
  ESTATE   Pending   n/a     n/a     77/616,292   USA   IC 006   Metal fasteners, namely, bolts, screws, rivets, nails, brackets and fittings for securing mailbox and mailbox post components together; metal mailboxes; metal posts
 
                                   
BERKSHIRE
  BERKSHIRE   Registered   1/11/2005     2,917,510     78/353,597   USA   IC 006   Metal mail boxes
 
                                   
FIRST CLASS
  FIRST CLASS   Registered   10/30/2007     3,325,892     78/534,588   USA   IC 006
IC 020
  Metal mail boxes;
Non-metal mail boxes
 
                                   
POSTMASTER
  POSTMASTER   Registered   11/7/2000     2,402,352     75/350,207   USA   IC 006
IC 020
  Metal mail boxes and accessories, namely, mounting brackets and shelf expanders; Non-metal mail boxes and accessories, namely, mounting brackets and shelf expanders


 

Solar Group, Inc.
Trademarks
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
POSTMASTER MAILBOX
(and design)
    Registered   6/25/1991     1,648,645     74/025,603   USA   IC 006
IC 020
  Stakes used to support mailboxes; Mailboxes and covers therefor
 
                                   
THE IRONSIDE
  THE IRONSIDE   Registered   3/19/2002     2,550,239     75/350,209   USA   IC 006   Mail boxes made predominately of metal


 

Trademarks
Southeastern Metals Manufacturing Company, Inc.
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
COPPERXT
  COPPERXT   Registered   9/9/2008     3,499,865     77/230,573   USA   IC 006   Metal and metallic composite products, in particular copper bonded to stainless steel, used in building and construction materials, namely, roofing materials, roof coverings, roofing panels, roofing trims, eave drips, trims, flashing and ventilation products for use in residential and commercial buildings
 
                                   
GH (and design)
    Registered   10/14/2008     3,516,869     76/671,372   USA   IC 006   Gutter rain water deflectors made primarily of metal.
 
                                   
GUTTER HELMET
  GUTTER HELMET   Registered   3/28/1989     1,531,983     73/698,205   USA   IC 019   Rain water gutter deflectors and associated hardware therefor sold as a unit therewith.
 
                                   
NEVER CLEAN YOUR
GUTTERS AGAIN!
  NEVER CLEAN YOUR
GUTTERS AGAIN!
  Registered   7/27/1999     2,264,723     75/484,077   USA   IC 006   Gutter rain water deflectors made primarily of metal
 
                                   
SM (and design)
    Registered   4/11/1978     1,089,047     73/121,768   USA   IC 006   Metal building and construction products-namely, hurricane clips, wall ties, valleys, gravel stops, downspouts and guttering, termite shields, joist hangers, and rod chairs
 
                                   
THE BEAUTY OF COPPER. THE STRENGTH OF STEEL.
  THE BEAUTY OF
COPPER. THE
STRENGTH OF STEEL.
  Registered   8/5/2008     3,480,169     77/362,411   USA   IC 006   Metal and metallic composite products, in particular copper bonded to stainless steel, used in building and construction materials, namely, roofing materials, roof coverings, roofing panels, roofing trims, eave drips, trims, flashing and ventilation products for use in residential and commercial buildings
 
                                   
TRUSTED QUALITY
TESTED STRENGTH
  TRUSTED QUALITY
TESTED STRENGTH
  Registered   1/13/2009     3,561,481     76/671,371   USA   IC 006   Metal building and metal construction products — namely steel framing, gutters, downspouts, lath, storm panels, ridge and hip plates, patio covers, concrete and masonry foundation connectors, column and post connectors, floor and deck connectors, roof and truss connectors, wall connectors, steel deck panels, eave drip, roof edge, gutter deflectors, flashing, gravel stops and cover plates, valleys and rail diverters metal roofing, corner beads, soffits, hurricane clips, wall ties, girder shields, termite shields, joist hangers and rod chairs, metal roof vents for ventilation in residential and commercial buildings


 

Trademarks
Southeastern Metals Manufacturing Company, Inc.
                                     
            Registration   Registration   Application            
Mark   Image   Status   Date   Number   Number   Country   Class   Goods or Services
GH MICRO-CS
COMMERCIAL SERIES
GUTTER PROTECTION
    Pending   n/a     n/a     77/618,898   USA   IC 019   Gutter rain water
protection panels
with screens made
from metal
 
                                   
DIAMOND
  DIAMOND   Pending   n/a     n/a     77/512,075   USA   IC 006   Metal building framing materials, namely, wall, ceiling, roof and floor framing materials made primarily of embossed metal
 
                                   
MICRO-CS
  MICRO-CS   Pending   n/a     n/a     77/618,888   USA   IC 019   Gutter rain water
protection panels
with screens made
from metal
 
                                   
MICRO-CS COMMERCIAL
SERIES GUTTER
PROTECTION
    Pending   n/a     n/a     77/618,895   USA   IC 019   Gutter rain water
protection panels
with screens made
from metal
 
                                   
SM SEMCO
SOUTHEASTERN
METALS CO
(and design)
    Pending   n/a     n/a     78/950,116   USA   IC 006
IC 019
  Metal building products, namely, roof coverings, gutters and downspouts, metal wall framing and flashing, metal roof and other metal exhaust vents for non-HVAC ventilation systems in residential and commercial buildings, metal beads, soffits and trim; Non-metal building products, namely, stucco lath and drywall beads, non-metal roof coverings, and trim.


 

Air Vent, Inc.
Patents
                             
    Application   Patent   Type            
Title   Number   Number   (U/D)   Filing Date   Date Issued   Country
Externally baffled ridge vent and methods of manufacture and use
  10/970,302     6,991,535     U   10/21/2004   1/31/2006   USA
 
                           
End-ventilating adjustable
pitch arcuate roof ventilator
  09/973,259     6,482,084     U   10/9/2001   11/19/2002   USA
 
                           
Multi-baffled roof ridge vent
  09/307,304     6,128,869     U   5/7/1999   10/10/2000   USA
 
                           
End-ventilating adjustable
pitch arcuate roof ventilator
  09/447,666     6,149,517     U   11/23/1999   11/21/2000   USA


 

Air Vent, Inc.
Patents
                             
    Application   Patent   Type            
Title   Number   Number   (U/D)   Filing Date   Date Issued   Country
Externally baffled ridge vent and methods of manufacture and use
  10/610,067     6,881,144     U   6/20/2003   4/19/2005   USA
 
                           
End-ventilating adjustable
pitch arcuate roof ventilator
  09/711,370     6,299,528     U   11/10/2000   10/9/2001   USA
 
                           
Vent with presecured
mechanical fasteners
  10/600,397     6,793,574     U   6/20/2003   9/21/2004   USA
 
                           
Ventilator
  07/443,215     4,962,882     U   11/27/1989   10/16/1990   USA
 
                           
Adjustable filtered roof
ridge ventilator
  07/664,394     5,122,095     U   3/4/1991   6/16/1992   USA


 

Air Vent, Inc.
Patents
                             
    Application   Patent   Type            
Title   Number   Number   (U/D)   Filing Date   Date Issued   Country
Temperature and humidity sensitive high efficiency exhaust ventilator apparatus
  07/882,182     5,253,804     U   5/12/1992   10/19/1993   USA
 
                           
Thrust bearing assembly for
roof turbine
  07/947,741     5,326,313     U   9/21/1992   7/5/1994   USA
 
                           
Power temp vent duct system
  08/020,686     5,294,049     U   2/22/1993   3/15/1994   USA
 
                           
Rollable ridge vent
  29/209,647     D511,847     D   7/19/2004   11/22/2005   USA
 
                           
Rollable ridge vent
  29/210,091     D511,848     D   7/27/2004   11/22/2005   USA
 
                           
Off-peak intake vent
  29/297,913     D574,947     D   11/21/2007   8/12/2008   USA


 

Air Vent, Inc.
Patents
                             
    Application   Patent   Type            
Title   Number   Number   (U/D)   Filing Date   Date Issued   Country
Externally baffled ridge vent
  11/238,315     n/a     U   9/29/2005   n/a   USA


 

Alabama Metal Industries Corporation
Patents
                             
    Application   Patent   Type       Date    
Title   Number   Number   (U/D)   Filing Date   Issued   Country
Plaster security barrier system
  08/399,566     5,697,195     U   3/7/1995   12/16/1997   USA
 
                           
Stucco arch casing bead
  08/703,013     5,699,638     U   8/26/1996   12/23/1997   USA
 
                           
Fastener clip for
security wall system
  09/226,048     6,367,216     U   1/4/1999   4/9/2002   USA
 
                           
Stucco reveal
connection system
  08/724,355     5,761,866     U   10/1/1996   6/9/1998   USA
 
                           
Contoured stucco reveal
  10/007,249     6,609,341     U   11/13/2001   8/26/2003   USA
 
                           
Door frame reinforcing
structure
  09/359,600     6,178,700     U   7/23/1999   1/30/2001   USA
 
                           
Banding bead
  08/008,537     5,423,154     U   1/25/1993   6/13/1995   USA
 
                           
Fence system
  08/058,577     5,421,557     U   5/6/1993   6/6/1995   USA
 
                           
Fence system
  08/407,616     5,556,080     U   3/21/1995   9/17/1996   USA
 
                           
Connector clip for corner bead
  08/320,433     5,531,051     U   10/7/1994   7/2/1996   USA
 
                           
Stucco reveal
  29/133,649     D456,528     D   12/1/2000   4/30/2002   USA
 
                           
Stucco casing bead
  29/156,923     D471,991     D   3/8/2002   3/18/2003   USA


 

Alabama Metal Industries Corporation
Patents
                             
    Application   Patent   Type       Date    
Title   Number   Number   (U/D)   Filing Date   Issued   Country
Non-conductive fencing
  11/396,880     n/a     U   4/3/2006   n/a   USA
 
                           
Movement control screed
  11/293,023     n/a     U   12/2/2005   n/a   USA


 

The D.S. Brown Company, Inc.
Patents
                                 
    Application   Patent   Type            
Title   Number   Number   (U/D)   Filing Date   Date Issued   Country
Suspension Bridge Cable Wrap and Application Method
    00/069,701       5,390,386     U   6/1/1993   2/21/1995   USA
 
                               
Suspension Bridge Cable Wrap and Application Method
    95300215.1       722015     n/a   1/13/1995   7/29/1998   European
 
                               
Suspension Bridge
Cable Wrap
    9501001       197,238     n/a   2/17/1995   6/28/2000   Mexico
 
                               
Suspension Bridge Cable Wrap and Application Method
    98113238.8     HK1012034   n/a   1/13/1995   4/28/2000   Hong Kong
 
                               
Suspension Bridge Cable Wrap and Application Method
    n/a       2,140,062     n/a   1/12/1995   3/2/2004   Canada
 
                               
Suspension Bridge Cable Tubelar
Article Wrap and Application Method
    n/a     ZL95100371.2   n/a   1/27/1995   1/7/2004   China
 
                               
Improved Exodermic Deck System
    n/a       2,239,727     n/a   12/6/1996   9/6/2005   Canada
 
                               
Exodermic Deck System
    00/183,945       5,509,243     U   1/21/1994   4/23/1996   USA
 
                               
Exodermic Deck System
    08/568,464       5,664,378     U   12/7/1995   9/9/1997   USA
 
                               
Prestressed or Post-Tension Composite Structural System
    10/725,185       7,197,854     U   12/1/2003   4/3/2007   USA
 
                               
System and Method for Electroslag Welding an Expansion Joint Rail
    10/712,390       7,038,159     U   11/12/2003   5/2/2006   USA
 
                               
Improved Exodermic Deck System
    n/a       2,181,554     n/a   1/20/1995   9/6/2005   Canada

 


 

The D.S. Brown Company, Inc.
Patents
                         
    Application   Patent   Type            
Title   Number   Number   (U/D)   Filing Date   Date Issued   Country
Patent Pending Applications
                       
 
                       
Method of Installing Elongate Strip Seals
  12/474,495   n/a   n/a   5/29/2009   n/a   USA
 
                       
Cylindrical
  12/831,812   n/a   n/a   7/7/2010   n/a   USA

 


 

Florence Corporation
Patents
                             
Patent       Application   Patent   Type       Date    
Owner   Title   Number   Number   (U/D)   Filing Date   Issued   Country
Florence Corporation
  Portions of post mountable mail boxes   29/185,753   D499,225   D   7/2/2003   11/30/2004   USA
 
                           
Florence Corporation
  Portions of roadside
mail boxes
  29/185,752   D499,524   D   7/2/2003   12/7/2004   USA
 
                           
Florence Corporation
  Portions of a post supportable mail box   29/185,750   D501,594   D   7/2/2003   2/1/2005   USA
 
                           
Florence Corporation
  Portions of post
mountable mail boxes
  29/185,751   D503,504   D   7/2/2003   3/29/2005   USA
 
                           
Florence Corporation
  Portions of a post
supported mail box
  29/185,747   D503,844   D   7/2/2003   4/5/2005   USA

 


 

Florence Corporation
Patents
                             
Patent       Application   Patent   Type       Date    
Owner   Title   Number   Number   (U/D)   Filing Date   Issued   Country
Florence Corporation
  Portions of a post for supporting mail boxes   29/185,748   D503,845   D   7/2/2003   4/5/2005   USA
 
                           
Florence Corporation
  Portions of central connector post and locking elements associated therewith for cluster box mail delivery receptacles   29/208,350   D536,155   D   6/29/2004   1/30/2007   USA
 
                           
Florence Corporation
  Portions of master door locking components of cluster box mail delivery receptacles   29/208,351   D543,335   D   6/29/2004   5/22/2007   USA
 
                           
Florence Corporation
  Exterior portions of guard assemblies for parcel door locking systems of cluster box unit mail delivery receptacles   29/208,364   D547,025   D   6/29/2004   7/17/2007   USA
 
                           
Florence Corporation
  Upper and lower portions of fronts of cluster box mail delivery receptacles   29/208,352   D549,424   D   6/29/2004   8/21/2007   USA

 


 

Florence Corporation
Patents
                             
Patent       Application   Patent   Type       Date    
Owner   Title   Number   Number   (U/D)   Filing Date   Issued   Country
Florence Corporation
  Roadside mail boxes and support posts for roadside mail box   10/881,797   n/a   U   unknown   n/a   USA
 
                           
Florence Corporation
  Pivotal bin mail boxes and pivotal support posts for mail boxes   10/881,799   n/a   U   unknown   n/a   USA
 
                           
Florence Corporation
  Portions of shelf box connectors, and shelf box portions connected therewith for use in cluster box mail delivery receptacles   29/208,345   n/a   D   unknown   n/a   USA
 
                           
Florence Corporation
  Front portions of pivotal doors of mail delivery receptacles   29/208,349   n/a   D   unknown   n/a   USA
 
                           
Florence Corporation
  Engageable shelf and door portions of cluster box mail delivery receptacles   29/208,353   n/a   D   unknown   n/a   USA

 


 

Florence Corporation
Patents
                             
Patent       Application   Patent   Type       Date    
Owner   Title   Number   Number   (U/D)   Filing Date   Issued   Country
Florence Corporation
  Portions of protective outer enclosures of cluster box mail delivery receptacles   29/208,354   n/a   D   unknown   n/a   USA
 
                           
Florence Corporation
  Portions of a rectangular door frame for a cluster box mail delivery receptacle   29/208,356   n/a   D   unknown   n/a   USA
 
                           
Florence Corporation
  Portions of master loading doors of cluster box mail delivery receptacles   29/208,357   n/a   D   unknown   n/a   USA
 
                           
Florence Corporation
  Portions of main doors of cluster box mail delivery receptacles   29/208,358   n/a   D   unknown   n/a   USA
 
                           
Florence Corporation
  Portions of a dual member hinge for doors   29/208,359   n/a   D   unknown   n/a   USA

 


 

Florence Corporation
Patents
                             
Patent       Application   Patent   Type       Date    
Owner   Title   Number   Number   (U/D)   Filing Date   Issued   Country
Florence Corporation
  Front portions of pivotally moveable doors of mail delivery receptacles   29/208,360   n/a   D   unknown   n/a   USA
 
                           
Florence Corporation
  Exterior portions of cluster box unit mail delivery receptacles   29/208,361   n/a   D   unknown   n/a   USA
 
                           
Florence Corporation
  Exterior portions of cluster box mail delivery receptacles   29/208,363   n/a   D   unknown   n/a   USA
 
                           
Florence Corporation
  Portions of door rigidifying extrusion for cluster box mail delivery receptacles, and portion of louver assembly formed therewith   29/208,368   n/a   D   unknown   n/a   USA

 


 

Florence Corporation
Patents
                             
Patent       Application   Patent   Type            
Owner   Title   Number   Number   (U/D)   Filing Date   Date Issued   Country
Florence Corporation
  Cluster box mail delivery
receptacles
  Provisional Application No. 60/583,419; Non-provisional Application No. 11/168,471; Non-provisional Application No. 11/168,302           USA

 


 

Noll/Norwesco, LLC
Patents
                                 
Patent       Application   Patent   Type       Date    
Owner   Title   Number   Number   (U/D)   Filing Date   Issued   Country
Noll/Norwesco, LLC
  Exhaust vent   08/152,288     5,662,522     U   11/12/1993   9/2/1997   USA
 
                               
Noll/Norwesco, LLC
  Foundation vent   08/015,605     5,444,947     U   2/9/1993   8/29/1995   USA
 
Noll/Norwesco, LLC
  Foundation ventilator   08/064,404     5,460,572     U   5/18/1993   10/24/1995   USA
 
Noll/Norwesco, LLC
  Foundation vent   08/156,412     5,496,213     U   11/22/1993   3/5/1996   USA

 


 

Sea Safe, Inc.
Patents
                             
    Application   Patent   Type       Date    
Title   Number   Number   (U/D)   Filing Date   Issued   Country
Small boat mooring system
  07/804,113     5,265,553     U   12/6/1991   11/30/1993   USA

 


 

Solar Group Inc.
Patents
                             
    Application   Patent   Type       Date    
Title   Number   Number   (U/D)   Filing Date   Issued   Country
Rotatable vent
  10/436,023     7,025,670     U   5/12/2003   4/11/2006   USA
 
                           
Secure parcel receptacle, lock assembly therefore and associated method
  09/824,138     6,412,688     U   4/2/2001   7/2/2002   USA
 
                           
Swivel post anchor
  08/937,757     5,884,874     U   9/25/1997   3/23/1999   USA
 
                           
Mailbox support post
  11/030,031     7,311,291     U   1/6/2005   12/25/2007   USA

 


 

Solar Group Inc.
Patents
                             
    Application   Patent   Type       Date    
Title   Number   Number   (U/D)   Filing Date   Issued   Country
Roll type roof ridge ventilator and associated method
  09/772,611     6,684,581     U   1/30/2001   2/3/2004   USA
 
                           
Roof ridge ventilation system
  07/643,223     5,095,810     U   1/22/1991   3/17/1992   USA

 


 

Solar Group Inc.
Patents
                             
    Application   Patent   Type       Date    
Title   Number   Number   (U/D)   Filing Date   Issued   Country
Modular shelving system
  11/048,838     n/a     U   2/2/2005   n/a   USA
 
                           
Nestable mailbox and method
  09/486,160     6,347,736     U   2/22/2000   2/19/2002   USA
 
                           
Reinforced plastic mailbox
  11/052,591     7,086,581     U   2/7/2005   8/8/2006   USA
 
                           
Ground mount post
  11/024,265     7,090,117     U   12/28/2004   8/15/2006   USA

 


 

Solar Group Inc.
Patents
                             
    Application   Patent   Type       Date    
Title   Number   Number   (U/D)   Filing Date   Issued   Country
Mailbox and support
  11/032,964     7,090,118     U   1/11/2005   8/15/2006   USA
 
                           
Mailbox door with rain
intercepting structure
  11/042,280     7,090,119     U   1/25/2005   8/15/2006   USA
 
                           
Multiple component mailbox having postal and newspaper compartments
  11/047,976     7,104,436     U   2/1/2005   9/12/2006   USA

 


 

Solar Group Inc.
Patents
                             
    Application   Patent   Type       Date    
Title   Number   Number   (U/D)   Filing Date   Issued   Country
Multiple purpose
newspaper box
  11/542,080     7,201,306     U   10/3/2006   4/10/2007   USA
 
                           
Mailbox stand
  09/181,237     5,971,267     U   10/28/1998   10/26/1999   USA
 
                           
Nestable mailbox and method
  08/917,645     5,988,495     U   8/22/1997   11/23/1999   USA
 
                           
Mailbox having stackable
component parts
  10/165,552     6,729,535     U   6/7/2002   5/4/2004   USA
 
                           
Two piece mailbox support
  11/052,648     7,510,162     U   2/7/2005   3/31/2009   USA
 
                           
Mailbox with signal
  11/047,977     7,055,736     U   2/1/2005   6/6/2006   USA
 
                           
Mailbox support apparatus
  07/477,246     5,022,618     U   2/8/1990   6/11/1991   USA
 
                           
Nestable mailbox
  29/100,321     D438,363     D   2/9/1999   2/27/2001   USA
 
                           
Nestable mailbox
  29/125,082     D452,358     D   6/16/2000   12/18/2001   USA
 
                           
Mailbox
  29/218,178     D514,270     D   11/29/2004   1/31/2006   USA
 
                           
Mailbox
  29/219,122     D517,270     D   12/13/2004   3/14/2006   USA

 


 

SCHEDULE 6.19
DEPOSIT ACCOUNTS***
         
    Depository Institution    
Credit Party   & Address   Type of Account
 
Gibraltar Steel Corporation of New York
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb.
 
       
Gibraltar Steel Corporation of New York — Flat Rolled Group
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
       
Southeastern Metals MFG. Co., Inc.
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
       
Solar Group, Inc.
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
       
Appleton Supply Co., Inc.
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
       
Solar of Michigan, Inc.
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
       
Construction Metals, LLC
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
Air Vent, Inc.
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb.

 


 

         
    Depository Institution    
Credit Party   & Address   Type of Account
 
Integrated Technologies INT’L., LTD.
(assumed name of Gibraltar Steel Corporation of New York)
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding
 
       
DOT Metal Products, Inc.
(assumed name of Southeastern Metals MFG. Co., Inc.)
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
       
AMICO
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
       
Gibraltar Steel Corporation of New York — Strip Division
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
       
Seasafe, Inc.
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
       
Noll/Norwesco, LLC
  Key Bank
127 Public Square
Cleveland, OH 44114
  Funding Cont. Disb. Lockbox
 
       
Gibraltar Industries, Inc. — Victory Inst. Money Market Fund-Investor
  Key Bank
127 Public Square
Cleveland, OH 44114
   
 
       
AMICO — Diamond
  Wells Fargo   Payroll **
general disbursement **
 
       
AMICO-Seasafe
  Capital One   Checking account**

 


 

         
    Depository Institution    
Credit Party   & Address   Type of Account
 
AMICO-US
  Regions Bank
Five Points W Lomb Ave
2800 Lomb Avenue
Birmingham, AL 35208
  Payroll**
 
       
Construction Metals, LLC
  Pacific Western Bank   Payroll**
 
       
DOT
(assumed name of Southeastern Metals MFG. Co., Inc.)
  American Bank of Texas
P.O. Box 888
Marble Falls, Texas 78654
  Payroll**
 
       
Florence
  Commerce Bank
727 Poyntz Avenue
Manhattan, KS ###-###-####
  Payroll**
 
       
Florence
  Harris Bank
PO Box 755
Chicago, Il 60690
  Disbursement **
 
       
Florence
  Harris Bank
PO Box 755
Chicago, Il 60690
  Lockbox**
 
       
Florence
  US Bank   Bond Issuance Cost Fund**
 
       
D. S. Brown Company
  Key Bank   Funding Cont. Disb. Lockbox
 
       
D. S. Brown Company
  MB Financial Bank
6111 North River Rd
Rosemont, IL 60018
  Disbursement ****
 
       
D. S. Brown Company
  MB Financial Bank
6111 North River Rd
Rosemont, IL 60018
  Payroll****

 


 

         
    Depository Institution    
Credit Party   & Address   Type of Account
 
D. S. Brown Company
  MB Financial Bank
6111 North River Rd
Rosemont, IL 60018
  Third Party Administrator Disbursements****
 
**   Each of these accounts is an Immaterial Deposit Account
 
***   Account Numbers are available to the Agent upon request
 
****   These accounts will be closed within one year from the D.S. Brown Acquisition Date